The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 23, 2012, 03:19 PM   #1
brokenarrow41
Member
 
Join Date: February 28, 2011
Location: Long Island NY
Posts: 24
Hornady Critical Defense

Does anyone know the material used in the tip of one of these rounds and is it worth trying to duplicate in other hollow points? It looks like Permatex high heat form a gasket.
__________________
NEMO ME IMPUNE LACESSIT
brokenarrow41 is offline  
Old March 25, 2012, 11:06 AM   #2
MrDontPlay
Senior Member
 
Join Date: December 25, 2010
Posts: 587
Unless you're going to use them for SD I don't think it's worth it. That stuff is there so the bullet doesnt get clogged with fabric from clothing. Cans and animals dont have clothes.
__________________
Someday I'll be good enough to know if a gun is accurate or not.
MrDontPlay is offline  
Old March 25, 2012, 12:36 PM   #3
PawPaw
Senior Member
 
Join Date: December 24, 2010
Location: Central Louisiana
Posts: 3,115
Yeah, I was looking at those the other day. It seems to me that the hollowpoint is already clogged with a squishy plastic. It should keep denim out, but what additional purpose it serves is beyond me.

I'm sure that they're good bullets, Hornady has made a name for building good bullets.
__________________
Dennis Dezendorf

http://pawpawshouse.blogspot.com
PawPaw is offline  
Old March 25, 2012, 04:04 PM   #4
3kgt2nv
Senior Member
 
Join Date: January 7, 2012
Location: hudson valley NY
Posts: 465
its a plastic polymer. you can pull them out with a metal pick to mess with them if you wanted to but they dont go back in.

its there to prevent the hollow point from getting "clogged" with whatever it is penetrating and to force expansion when it encounters an object.

think of using a wedge to split a log. it has to force the wood apart because it has nowhere else to go. same with the polymer plug. it cant move down the bullet so it pushes out on the sides forcing the bullet to "flower" open. All the ones i shot at water jugs look just like they do in the pictures. nice and open.

Its why i use the critical defense and the critical duty as my round of choice for carry.
3kgt2nv is offline  
Old March 25, 2012, 06:23 PM   #5
Cascade1911
Senior Member
 
Join Date: February 27, 2011
Location: Dutchess County, NY
Posts: 450
OK, nobody out there has tried some silicone? Really?
Cascade1911 is offline  
Old March 26, 2012, 06:14 PM   #6
zeke
Senior Member
 
Join Date: November 17, 1999
Location: NW Wi
Posts: 395
google "silicone in jhp's"
zeke is offline  
Old March 26, 2012, 11:10 PM   #7
dacaur
Senior Member
 
Join Date: March 16, 2010
Posts: 733
Just an FYI.... I had been under the impression that critical defense was a bonded bullet for some reason, its not. Found that out shooting phone books when the jacket/core sperated) after I switched to speer gold dot (yes that one is bonded) I shot both types at some 3/4" Plexiglas.... the hornady made it in about 1/8" and bounced out... didn't find it and didn't hear it ricochet so dont know what happened exactly... A FMJ and a Speer gold dot both penetrated completly and stopped in the Plexiglas (its tough stuff!!!)....

The other reason I dont like the critical defense.... the plastic tip can drag on the mag and slow things down just enough to cause a misfeed....
dacaur is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08292 seconds with 9 queries