The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 20, 2012, 09:39 PM   #1
wbdrey
Junior Member
 
Join Date: March 17, 2012
Posts: 3
A help with figuring out A Bauer 25 problem

I have acquired a stainless Bauer that appeared to be unused when I bought it. My problem is it won't pick up the next round in the magazine. I cleaned, oiled, hand cycled it a bunch of times; did this three times. When I work the slide it feels crunchy( best way I can describe it) at the end of the travel, like a bunching spring such. Should I try different ammo, currently have some american eagle, or take it to the smithy to figure out. Any suggestions?
wbdrey is offline  
Old March 21, 2012, 04:09 PM   #2
Roughedge
Senior Member
 
Join Date: January 24, 2011
Location: Monroe,NC
Posts: 332
are you sure it the correct magazine
__________________
The man that die's with the most stuff win's!
Roughedge is offline  
Old March 22, 2012, 08:25 PM   #3
Superhouse 15
Senior Member
 
Join Date: September 13, 2007
Location: Sunny Florida
Posts: 844
The "crunchy" spring is normal for that design. Check out where the striker sits on the sear when it's disassembled and you'll see why. It does indeed sound like a mag issue
Superhouse 15 is offline  
Old March 22, 2012, 10:37 PM   #4
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,152
I am willing to make a small bet that the "crunchy" sound (not normal) is connected to the failure to pick up a round from the magazine. If the firing pin spring guide is missing and the spring kinks, or the firing pin spring and guide were lost (a common situation), and someone replaced the spring with the wrong kind, the result will be exactly what you have experienced as the slide won't come back far enough to pick up a round.

The Bauer is a copy of the Baby Browning (the later gun, not the 1906 model) and parts from the Browning should fit.

Jim
__________________
Jim K
James K is offline  
Old March 26, 2012, 07:18 AM   #5
wbdrey
Junior Member
 
Join Date: March 17, 2012
Posts: 3
Thank you for your responses. I will see if I can find less than a gillion dollar magazine. I might just for kicks get a spring set from Wolff for it and see what happens. I will update this when something happens.
wbdrey is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06375 seconds with 9 queries