The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Thread Tools
Old March 20, 2012, 07:00 AM   #1
Senior Member
Join Date: October 20, 2004
Location: oklahoma
Posts: 341
PPK issue

Have interarms ppk .380...carried much, shot little.
use as CCW from time-to-time.
Recently (when operated manually) the slide binds
about 1/4 inch or so happens often as when
operating slide to insert fresh round from new magazine
or when cleaning and oiling pistol.
I suspect some kind of "spring binding", perhaps recoil spring
hanging up on muzzle as slide moves back..but have no
real clue what causes it.

any ideas on what this is and remedy?

Have decided should shelve this pistol until I know
this is not functional issue of safety/reliability.

trespass is offline  
Old March 20, 2012, 07:12 AM   #2
Join Date: November 30, 2011
Posts: 22
Perhaps the recoil spring is installed backward? The smaller end should be toward the rear.
mooney1el is offline  
Old March 21, 2012, 08:50 AM   #3
Senior Member
Join Date: October 20, 2004
Location: oklahoma
Posts: 341

spring is good.

pistil seems to have a bit of "play" in it as the slide is drawn back...
cannot determine why...

suppose I will pack this off to a good smith for a proper checking.
thanks for the suggestion.
trespass is offline  
Old March 21, 2012, 04:34 PM   #4
Senior Member
Join Date: September 28, 2008
Posts: 6,835
Have you tried it without the recoil spring?
That might tell something.
Lock the doors, they're coming in the windows.
g.willikers is offline  

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 02:31 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.06348 seconds with 9 queries