![]() |
|
|
#1 |
|
Senior Member
Join Date: April 3, 2011
Posts: 2,067
|
Hodgdon CFE 223
I know this is really new as far as powder goes.
http://www.hodgdon.com/new_prod.html Anybody have a chance to use it yet? |
|
|
|
|
#2 |
|
Senior Member
Join Date: April 3, 2011
Posts: 2,067
|
Wow, nobody has tried it. I guess I'll be the first one then, well after my H335 and BLC2 run out. Which is another 500+ loads I guess.
|
|
|
|
|
#3 |
|
Senior Member
Join Date: November 6, 2010
Location: west central Illinois
Posts: 260
|
Well, you shouldn't be the only one to take one for the team.
I'm going to a gun shop this afternoon and if they have it in stock, I'll buy some also. I've been working on building some precision rounds for my Sport and I'll give it a go on a few and see how it works.It'll be a week or so before I get a chance to shoot it if God is willing and the creek don't rise(also if the lgs has it)and I'll report back as to how it goes. Regards, Hobie |
|
|
|
|
#4 |
|
Senior Member
Join Date: August 20, 2002
Posts: 2,071
|
Used close to half can, very good in my AR using sierra 52gr match, plan on buying more.
|
|
|
|
|
#5 |
|
Senior Member
Join Date: April 15, 2011
Location: Arizona
Posts: 163
|
__________________
I'm just an average man I drive a average van My dog ain't got no pedigree! |
|
|
|
|
#6 |
|
Senior Member
Join Date: April 3, 2011
Posts: 2,067
|
1hobie - looks like Wingman beat us to it.
![]() Wingman - Well from reading the other thread, it seems like you like it a lot. I was looking for a can locally, but not available in my area yet. I don't like paying the hazardous cargo charge on a 1lb can. It only pays off if I buy the 8lb can but was not sure about the new powder yet. How does it compare to H335 or BLC2? |
|
|
|
|
#7 |
|
Senior Member
Join Date: December 28, 2009
Location: North Central Illinois
Posts: 932
|
I bought a can of CFE223 at the last gun show and loaded up 5 each, 5 different charges with two types of bullets (55gr V-Max and 52gr A-Max), 50 rounds total, of .223. Plan to have some fun trying it out here when the range opens in a few weeks. I’m hoping that the 52 grain A-Max bullets give me good results. They do using IMR3031 powder.
|
|
|
|
|
#8 | |
|
Senior Member
Join Date: August 20, 2002
Posts: 2,071
|
Quote:
According to burn rate it's similar to BLC2,I don't have the equipment to give you velocity however since I target shoot only I'm concerned with accuracy and the CFE seems excellent, using a Stag Model 3 chrome bore 1/9 twist normal groups of .750-1.0 @100 yards but with the CFE had a couple groups under 1/2 inch, perhaps just a fluke but will know for sure after a couple pounds , at any rate I do like this powder. Cleaning issue has improved. I want to test more in my Model 12 also but have not had time to work up loads. I purchased my can along with other powder from Powder valley could not find it local, wish I had added a couple more cans to order.
|
|
|
|
|
|
#9 |
|
Senior Member
Join Date: April 3, 2011
Posts: 2,067
|
Thanks Wingman. I've had good luck with the BLC2 and 55 gr V-max. Will give this CFE a try when I can get an order in.
|
|
|
|
|
#10 |
|
Senior Member
Join Date: January 15, 2008
Location: PRK
Posts: 728
|
This is kind of like the Alliant Power Pro 300MP saga. I read about it, and even looked at load data long before I could find any. I guess powders don't always get released to the public before the hype about them does. Oh well, I finally found some, and it was worth the wait. Not really economical, but a very powerful, fun shooting product. Alliant's answer to 296, it would seem.
__________________
I ain't got no safe queens. I shoots em all... |
|
|
![]() |
| Thread Tools | |
|
|