The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 11, 2012, 01:19 AM   #1
War_Eagle
Member
 
Join Date: April 30, 2009
Location: Greenfield, WI. USA
Posts: 39
Trigger swap on S&W model 19

I am looking to change my smooth service trigger for the serrated target type. I have the trigger and wanted to get a ballpark on what a smith would charge to do the swap? Thanks
War_Eagle is offline  
Old February 12, 2012, 10:46 AM   #2
War_Eagle
Member
 
Join Date: April 30, 2009
Location: Greenfield, WI. USA
Posts: 39
Well has anyone done the swap themselves? If so could you post some info? Thanks
War_Eagle is offline  
Old February 12, 2012, 11:27 AM   #3
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 5,048
Just do a search on youtube for "S&W revolver trigger" or similar.
There's a ton of how to videos there to help.
__________________
Lock the doors, they're coming in the windows.
g.willikers is offline  
Old February 12, 2012, 11:38 AM   #4
mete
Senior Member
 
Join Date: June 14, 2004
Location: NY State
Posts: 5,334
The swap is not a big deal .all you have to know is how to disassemble the revolver.
My M29 came with the 'target' [1/2" grooved] trigger but I immediately changed it for the 'combat' [3/8" smooth ] much better I think for target, hunting or defence .
If you have a knowledgeble gunsmith do it he could smooth things up too.
__________________
And Watson , bring your revolver !
mete is offline  
Old February 12, 2012, 08:50 PM   #5
Dfariswheel
Senior Member
 
Join Date: May 4, 2001
Posts: 6,822
A gunsmith should not charge a great deal to change a S&W trigger.
While you do get cases where the trigger needs some fitting and adjusting, "most" of the time it's a direct drop in fit.

WHAT a gunsmith will charge depends on the going rates locally, and how reasonable the gunsmith is on his charges.

If you'd like to tackle it yourself, all you really need is a copy of the Jerry Kuhnhausen shop manual and a Brownell's Magna-Tip screwdriver set for the S&W revolvers.

The shop manual was written as a training aid for student gunsmiths and shows everything about how to work on the S&W revolvers the FACTORY way.
This is the best S&W gunsmithing info available and the best money a S&W owner can spend. It goes into great detail on fitting new parts like triggers:

http://www.brownells.com/.aspx/pid=2...-A-SHOP-MANUAL

http://www.brownells.com/.aspx/pid=4...-W-SCREWDRIVER
Dfariswheel is offline  
Old February 12, 2012, 11:43 PM   #6
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,321
Depends on the era but at worst two small pins have to be punched out and then driven back in. Shouldn't take a gunsmith with any experience more than 15-20 minutes. The new MIM triggers don't even have the pins.

Jim
__________________
Jim K
James K is offline  
Old February 13, 2012, 10:19 AM   #7
madcratebuilder
Senior Member
 
Join Date: November 2, 2007
Location: Northern Orygun
Posts: 4,868
Buy the books and tools. This is a excellent opportunity to learn some gun mechanic skills. This is a pretty easy swap with little to no fitting involved.
madcratebuilder is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07467 seconds with 7 queries