The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 7, 2012, 06:00 PM   #1
JD Powell
Member
 
Join Date: July 28, 2011
Posts: 40
Enlarging ejection port. Marlin mod 60.

Hey folks,
This may be a stupid question, if so feel free to tell me.

I have an old Marlin model 60. (tube fed semi auto .22 rifle for those unfamiliar.) Unfortunately my fingers are way to big to insert cartridges single shot style through the ejection port. This is however a necessary action. What I would like to do is machine the top right side of the receiver directly above the ejection port back about 1/4". Just to where the groove for the scope mount starts. This would allow me much better access to the chamber. For loading individual shells.

From my mechanical understanding of the firearm, this seems doable. The top inside of the receiver is flat, and does not seem to directly affect/guide the bolt in such a way that would be a problem. It would still leave enough room up front for my forward scope ring.

Parts for these old guns are all over ebay, so I could pick up a spare receiver and barrel cheap to screw around with.

Thoughts, suggestions?
JD Powell is offline  
Old February 7, 2012, 06:39 PM   #2
g.willikers
Senior Member
 
Join Date: September 28, 2008
Posts: 5,268
Why not just use some kind of tool to insert the round, like a skinny clothes pin type?
__________________
Lock the doors, they're coming in the windows.
g.willikers is offline  
Old February 7, 2012, 09:01 PM   #3
JD Powell
Member
 
Join Date: July 28, 2011
Posts: 40
That's what I have to do now. I hold the cartridge rim between the tip of my finger and the blade of my pocket knife. Then try to find the chamber with the tip of the bullet before I drop it. It's mighty inconvenient.
JD Powell is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:31 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06092 seconds with 7 queries