The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Curios and Relics

Reply
 
Thread Tools
Old January 29, 2012, 01:23 PM   #1
Radar51
Junior Member
 
Join Date: January 29, 2012
Posts: 1
Remington Rifle with Hexagon Barrel

I Remington rifle with a hexagon barrel. I inherited it from my grandfather. On the barrel it states it was made in NY, and has the number J209808, then there is a 32 which I believe is the caliber. Close to the stock is the letter P. It is a single shot and has a rear breach. The barrel is 23-3/8 inches. It comes apart and easily and is two pieces. It has a single hammer that you pull back to safety and then pull back to fire, and has a breach with a firing pin in it that you pull back to load your shell. I am not trying sell this gun, just trying to find out how old it is and what it would be worth.

I hope I am posting this in the correct forum. I am a newbie.
Radar51 is offline  
Old January 30, 2012, 12:24 AM   #2
Scorch
Senior Member
 
Join Date: February 13, 2006
Location: Washington state
Posts: 11,450
Sounds like a #4 Remington Rolling Block. If so, 32 caliber could be 32 Short or 32 Long.
__________________
Never try to educate someone who resists knowledge at all costs.
But what do I know?
Summit Arms Services
Taylor Machine
Scorch is offline  
Old January 30, 2012, 05:09 PM   #3
boostedtt91
Senior Member
 
Join Date: January 28, 2011
Location: Danville, Pa
Posts: 518
picture would be really helpful if you can post one
boostedtt91 is offline  
Old January 30, 2012, 05:45 PM   #4
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,264
most of those were rimfire as well... & the actions aren't known for there strength... not strong enough to go to a 22 Hornet, or even safely convert to the 32 centerfires

nice old rifles in thier own rite though... if I had one, I'd probably have my machinist buddy make me a 22 lr chamber insert & reline the barrel unless it were in good enough shape to leave as a safe queen
__________________
In life you either make dust or eat dust...
Magnum Wheel Man is offline  
Old January 30, 2012, 06:00 PM   #5
TomADC
Senior Member
 
Join Date: October 14, 2009
Posts: 554
http://www.remington.com/products/ar...ing-block.aspx
__________________
US Navy Retired,NRA Life Member,SASS member, Time magazine's Person of the Year 2006!
TomADC is offline  
Old February 2, 2012, 03:52 PM   #6
PetahW
Senior Member
 
Join Date: September 19, 2008
Posts: 4,679
You might have typoed the SN, since Remington only made about 360,000 of the petite #4 Rolling Block rifles, 1890-1933.
They were classed/sold as "Boy's Rifles".

Some were made with round bbls, some with octagonal bbls, in both solid or takedown frames.

They are ID by being the only RB rifle w/o a lower action tang.

The #4 was chambered only for RF cartidges.
I've converted solid-frame .32RF specimens to centerfire, as the commercially-available .32 Short Colt will chamber/fire safely - but wouldn't recommend doing so with a thinner takedown frame.

.
PetahW is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:35 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09613 seconds with 9 queries