The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old February 2, 2012, 09:24 AM   #1
Jimbo-Indy
Senior Member
 
Join Date: August 27, 2008
Location: Indianapolis, IN
Posts: 232
Nipple size for 51 Navy repro.

I have a Traditions 1851 Navy, brass frame, 44 cal. revolver. I can't find any markings as to the true manufacturer, just the basic Italian proof marks. The date code is for 1985. Does anyone know the thread for the nipples and/or the proper nipple to buy? The gun works just fine except for crappy nipples that are a little to big for #10 and slightly loose with #11.
Jimbo-Indy is offline  
Old February 2, 2012, 10:15 AM   #2
timothy75
Senior Member
 
Join Date: April 19, 2005
Location: Nevada
Posts: 1,113
All mine are the same way, just pinch the 11's a bit with your fingers. As the gun gets dirty while firing they'll fit tighter.
timothy75 is offline  
Old February 2, 2012, 10:58 AM   #3
Fingers McGee
Senior Member
 
Join Date: March 19, 2008
Location: Missouri
Posts: 1,851
What markings are on it? FAP in a diamond is Pietta, and an intertwined ASM is Armi San Marco.

ASM - Top left corner of the frame:
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters
Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce
Fingers McGee is online now  
Old February 2, 2012, 11:13 AM   #4
Jimbo-Indy
Senior Member
 
Join Date: August 27, 2008
Location: Indianapolis, IN
Posts: 232
I didn't see any manufacturers symbols, just the proof marks and the date code. I will look again when I get home tonight and repost if I can find anything. Thanks for the help.
The problem with the nipples is that most of them are not round at the top, where the cap fits over. It's like they have a small flat ground in the side. This is not the flat next to the cylinder where the nipple wrench fits. It's almost like a piece of the nipple has chipped off.
Jimbo-Indy is offline  
Old February 2, 2012, 12:11 PM   #5
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 4,573
Just to add complexity

I had a Pietta frame which was not marked at all.
__________________
Doc

My reading of history convinces me that most bad government results from too much government. Thomas Jefferson
Doc Hoy is offline  
Old February 2, 2012, 07:38 PM   #6
Hellgate
Senior Member
 
Join Date: November 18, 2010
Location: Orygun
Posts: 518
A lot of my stock ASM nipples are somewhat flattened on two sides i.e. not true cone shaped. Look under the rammer for more marks and describe them to us.
The ASMs & Ubertis take the more coars threaded 12X28 nipples and Pietta takes the 6X.75mm
__________________
With over 15 perCUSSIN' revolvers, I've been called the Imelda Marcos of cap & ball.
SASS#3302 (Life), SASS Regulator, NRA (Life), DGB#129
Wolverton Mtn. Peacekeepers (WA), former Orygun Cowboy (Ranger, Posse from Hell)
Hellgate is offline  
Old February 2, 2012, 10:05 PM   #7
Jimbo-Indy
Senior Member
 
Join Date: August 27, 2008
Location: Indianapolis, IN
Posts: 232
I found it! Actually I was confusing two different guns. The Traditions '51 Navy is marked ASM. I also have a '58 Remy that is marked CVA but has no manufacturers markings. The '51 Navy is the one with the funky nipples. The Remy is just fine.
Thanks for all the help. Now I know what size nipples to order.
Jimbo-Indy is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07193 seconds with 9 queries