The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 21, 2012, 01:00 PM   #1
mdevlin53
Member
 
Join Date: January 7, 2012
Location: new york
Posts: 21
1909 Argentine Mauser project

I have had a sporterized 1909 Mauser rechambered in 30.06 for about 20 years. I picked it up for about 50 bucks and used it for deer hunting for several years. It is a servicable rifle but not a beauty by any means. the question is should i do anything with it to make it look better or just keep it clean and trot it out to the range once in a while.
Attached Images
File Type: jpg 09 gun 1.jpg (209.0 KB, 64 views)
File Type: jpg 09 gun 2.jpg (213.1 KB, 49 views)
mdevlin53 is offline  
Old January 21, 2012, 01:09 PM   #2
Goatwhiskers
Senior Member
 
Join Date: April 8, 2009
Location: Batchelor, La.
Posts: 464
A very servicable old rifle, wouldn't mind owning it myself. Looks like you're missing one of the scope mount blocks. Not "collectible" so I would say do whatever you want with it as far as refinishing, hunt with it, and pass it on to your kids. Goat
Goatwhiskers is online now  
Old January 21, 2012, 01:49 PM   #3
mdevlin53
Member
 
Join Date: January 7, 2012
Location: new york
Posts: 21
I removed the front scope mount to see the emblem on the receiver. I need to give this gun a good cleaning anyway. It has never been out of the stock since i got it so now might be a good time. I was looking at replacement stocks but i have not seen one with great reviews yet.
mdevlin53 is offline  
Old January 28, 2012, 06:09 PM   #4
tahoe2
Senior Member
 
Join Date: August 13, 2011
Location: Seattle area
Posts: 517
boyds stocks

I have two , one in a Yugo M24/47 and one in a Spanish M95 (the one on the bottom) guns 053.jpg
Prices are reasonable and several options available.
I bought mine unfinished and sanded and fitted them myself. Hand rubbed Tru Oil finish.

Last edited by tahoe2; January 28, 2012 at 06:16 PM.
tahoe2 is offline  
Old January 29, 2012, 07:28 AM   #5
mdevlin53
Member
 
Join Date: January 7, 2012
Location: new york
Posts: 21
I decided to clean up the stock and refinish it then keep it as a backup deer rifle. I removed the old finish but there are several places where the wood is almost black. I assume this is form oil as it is mostly where the metal was close to the wood. also where the end grain is like on the end of the comb and forend. I used some fine sandpaper to remove the finish and some furniture refinisher to remove the stain. I am not pleased with the wood underneath as it is faily bland with not much figure. When done i will post some pictures,
mdevlin53 is offline  
Old January 29, 2012, 11:14 AM   #6
mdevlin53
Member
 
Join Date: January 7, 2012
Location: new york
Posts: 21
getting to the bare wood

I just spent another hour sanding this stock. The paper is still getting gummed up so that means i am still removing finish and stain or so i beleive. The fellow who did the original sporterization must have used 80 grit and a file because there are a lot of deep sanding scratches in the wood. It is looking better but in the end the wood is nothing special. I understand that these guns were mass produced and were not meant to be pretty so if i can get it to look uniform without any real dark spots i will be happy. The stain. its not like i have another peice of wood to test it out on,
mdevlin53 is offline  
Old January 30, 2012, 09:05 PM   #7
Harry Bonar
Senior Member
 
Join Date: December 5, 2004
Location: In the Vincent, Ohio general area.
Posts: 1,804
stock

Sir;
You really don't have to remove ALL the finish if you use potassium permanganate on it (saturated solution)! Your Doc. will give you a prescription!
Harry B.
Harry Bonar is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07173 seconds with 8 queries