The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old January 20, 2012, 04:56 PM   #1
Redneck_Riot
Member
 
Join Date: December 15, 2006
Posts: 80
Best way to learn the craft of gunsmithing

I am a 34 year old man that has always been fascinated with firearms ever since I can remember, I am good with my hands and for the most part like to do my own work and figure things out for my self. I would like to learn the gun smithing tradecraft, what is the best way to approach this besides the obvious enrollment into a trade school?

I have talked to most of the smiths in my area and have been unsuccessful so far when broaching the subject of my desire to learn their craft. I understand most do not have the time to teach, but I am not looking to be payed just seeking to learn the art.

I am in puyallup and strongly desire to learn from a knowledgeable smith, is there anyone in the membership or someone you may know that would like to pass on their knowledge and skillset to a young man who is willing to listen and learn?
I would be willing to travel a reasonable amount from Puyallup to make this happen.

Thank you for your time, I have met some very nice and helpful people here on TFL.
Redneck_Riot is offline  
Old January 20, 2012, 08:35 PM   #2
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,375
The best way is to move to Ferlach, Austria, and get a three year apprenticeship, followed by 5 years of journeyman work, and two years of master school.
__________________
F 135 - the right choice
mapsjanhere is offline  
Old January 20, 2012, 08:37 PM   #3
Fleet
Senior Member
 
Join Date: December 1, 2011
Posts: 108
Well, there's a couple of things you can do.

For starters, take some machine shop classes at your local J.C.
Ditto welding.

Just tell the instructors what you're doing. If you don't, the machine shop guy will probably spend most of the time trying to teach you CNC, and what you need is to learn how to run and engine lathe and a Bridgeport mill. The welding guy will spend his time trying to get you to certify, which would be a waste of time.
The AGI video courses have a lot of good information in them. Won't make you a gunsmith, which will take years. But not a bad idea.
Fleet is offline  
Old January 20, 2012, 10:25 PM   #4
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,852
In regard to most gunsmiths, it is not reluctance to pass on info, they simply don't have the time. Whether you are paid or not doesn't matter. Some smiths might take you on as a counter guy, to listen to all the BS from the public, but you won't learn that way.

Yes, go to a trade school. Then take courses in how to run a business, bookkeeping, record keeping, compliance with all the laws (not just gun laws), all the licenses (not just an FFL), profit margins, how to calculate how much your time is worth, etc., etc.

Most gunsmiths are like yourself - they want to have fun at their hobby and make money too. It won't work. Unless you decide to be a businessman who happens to work on guns instead of cars or wool rugs or wood carvings, you will fail. And do you have capital to start a business? NO, a mill bastard file and a set of screwdrivers is not enough. One estimate is $100k to set up a gunsmithing business.

And don't do it in your home.

There is a lot more at a thread I started here:

http://www.thehighroad.org/showthread.php?t=637143

Jim
__________________
Jim K
James K is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06261 seconds with 7 queries