The Firing Line Forums

Go Back   The Firing Line Forums > Hogan's Alley > Handguns: The Revolver Forum

Reply
 
Thread Tools
Old October 4, 2012, 04:31 PM   #1
BLUETIP
Senior Member
 
Join Date: September 30, 2012
Location: tennessee
Posts: 119
Super blackhawk load gate issue

Why does my loading gate come open when firing my hand loads?
Is something worn or maybe load is to hot. 210grn hp 28 gr h110. This problem only happens maybe every third shot sometimes forth.
I dont have sticky cartridge problems or primer bulges. I have shot this same load with 240 gr until this started happening so thought maybe a lighter projectile would help but it did not.
BLUETIP is offline  
Old October 4, 2012, 04:42 PM   #2
Nanuk
Senior Member
 
Join Date: January 2, 2005
Location: Where the deer and the antelope roam.
Posts: 1,690
How does it feel any other time? You may need a new spring.
__________________
My rifle and pistol are tools, I am the weapon.
Nanuk is offline  
Old October 4, 2012, 05:44 PM   #3
Jim March
Senior Member
 
Join Date: February 14, 1999
Location: Pittsburg, CA, USA
Posts: 7,300
There's a spring in there that, among other things, holds the loading gate closed.

http://www.brownells.com/.aspx/pid=0...uper-Blackhawk

Part 17.
__________________
Jim March
Jim March is offline  
Old October 4, 2012, 06:08 PM   #4
skidder
Senior Member
 
Join Date: August 17, 2008
Location: Montana
Posts: 628
Like others have said it could be the spring has lost it's tension, but you can also check the gate to see if its worn.

Take your cylinder out and eyeball the gate hinge while you open and close the gate. Make sure the end of the spring is not overlapping the recess on the gate. The spring is designed to glide in this groove/recess over a high spot on the groove. If this high spot, or spring, is worn down the gate may lose its ability to stay firmly closed.

note: You will only see the end of the spring, the spring itself is housed in the frame.
__________________
Gun permit?? A bread crumb tossed to a sleeping society awoken by the sound of complacency. "They are for your own good", and "you will understand when you see all the lives they save". Yes master, what else will you toss me from your bag of infringements?? Do you want me to roll over and play dead? I do that very well. --skidder
skidder is offline  
Old October 4, 2012, 06:29 PM   #5
Kilibreaux
Junior Member
 
Join Date: October 4, 2012
Posts: 13
The only thing it can be is a worn or broken spring, or excessive wear on the loading gate pivot.
Loading gate issues are unheard of on Ruger Blackhawks...sounds like someone may have included the loading gate and spring in some sort of action improvement project.
Kilibreaux is offline  
Old October 4, 2012, 06:47 PM   #6
Guv
Senior Member
 
Join Date: February 24, 2012
Location: South Texas
Posts: 876
I had a 5.5" Super that would do the same thing with a 265 gr Hornady FP in a hot hand load with 2400. I sent it back to Ruger and they put a stiffer spring, this fixed the problem, no charge, but a real bugger to open!
Guv is offline  
Old October 4, 2012, 09:07 PM   #7
BLUETIP
Senior Member
 
Join Date: September 30, 2012
Location: tennessee
Posts: 119
Thank you all very much. Ill check it out.
BLUETIP is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08076 seconds with 9 queries