Totally politically incorrect

duelist1954 · December 29, 2011, 06:55 PM

This is a bit off topic, but, on the plus side, Single shot, black powder .45-70 rifles were used.

This video is about hunting Teddy Bears. PETSA (People fot the Ethical Treatment of Stuffed Animals) is already boycotting it.

http://www.youtube.com/watch?v=8fHZbSpmnA4

Jo6pak · December 29, 2011, 07:25 PM

That's hilarious!

I just shot milk out of my nose.....odd that I wasn't even drinking milk at the time

jimbob86 · December 29, 2011, 08:24 PM

You know, if you soak them in water first, then freeze them ....... they make better reactive targets.......

hoytinak · December 29, 2011, 08:35 PM

freakin' hilarious.....gotta share that vid with some buddies!

shortwave · December 29, 2011, 08:43 PM

Now that's funny.

Is that you Gehrhard?

I really think the plated, buffered, 00 or 000 buck in 3" Super Magnum would be adequate for these dangerous bruins. Sorry to doubt you.

rtpzwms · December 29, 2011, 08:43 PM

I thought they had Tannerite hearts... I may have to go hunting teddy bears!

bedbugbilly · December 29, 2011, 10:27 PM

I'm pretty sure that was a smokeless round . . . ?

The nice thing about those breeds of bears is that, unlike turkeys, they come already stuffed.

Hawg Haggen · December 30, 2011, 02:44 AM

Love that rug.

Doc Hoy · December 30, 2011, 06:26 AM

Good job, Mike and nice Christmas present

dlbarr · December 30, 2011, 03:38 PM

Hilarious!

Hey Mike, where'd you get that trigger guard on the handi rifle and how did you attach it? I've got a 45-70 HR myself.

Thanks for the entertainment!!

illus1on · December 30, 2011, 03:44 PM

"Thats what teddy hunt'n is all about.."

Young.Gun.612 · December 30, 2011, 04:15 PM

Thank goodness you got those godless killing machines before they got you!

duelist1954 · December 30, 2011, 04:33 PM

Hi Dlbarr,

That was a small Kentucky rifle trigger guard I got from Dixie Gun Works many years ago.

I cut off the old plastic trigger guard flush with the receiver. Then I inletted the tail of the new guard into the butt stock and secured it with a wood screw. Then I drilled and tapped the receiver for a 10x32 screw and used that to secure the front of the guard.

dlbarr · December 30, 2011, 04:39 PM

Thanks Mike. I have a brass trigger guard or two laying around. I'll see if they might be a fit. Did you disassemble the action to cut that old plastic guard or did you just do it on the gun?

duelist1954 · December 30, 2011, 05:35 PM

I just did it on the gun

Hardcase · January 2, 2012, 01:04 PM

Boy, you'd think by now I'd know just what I should show my wife and what I should reserve for my own personal entertainment.

She didn't see the same hilarity that I saw. It wasn't "doghouse bad", but apparently she has a softer spot for ursus theodori than I thought!

December 29, 2011, 06:55 PM	#1
duelist1954 Senior Member Join Date: March 14, 2011 Location: Central Pennsylvania Posts: 381	Totally politically incorrect This is a bit off topic, but, on the plus side, Single shot, black powder .45-70 rifles were used. This video is about hunting Teddy Bears. PETSA (People fot the Ethical Treatment of Stuffed Animals) is already boycotting it. http://www.youtube.com/watch?v=8fHZbSpmnA4

December 29, 2011, 07:25 PM	#2
Jo6pak Senior Member Join Date: August 5, 2010 Location: West Coast...of WI Posts: 1,144	That's hilarious! I just shot milk out of my nose.....odd that I wasn't even drinking milk at the time __________________ NRA Life Member, SAF contributor.

December 29, 2011, 08:24 PM	#3
jimbob86 Senior Member Join Date: October 4, 2007 Location: All the way to NEBRASKA Posts: 5,257	You know, if you soak them in water first, then freeze them ....... they make better reactive targets....... __________________ TheGolden Rule of Tool Use: "If you don't know what you are doing, DON'T." http://nefirearm.com/

December 29, 2011, 08:43 PM	#5
shortwave Senior Member Join Date: December 17, 2007 Location: SOUTHEAST, OHIO Posts: 5,008	Now that's funny. Is that you Gehrhard? I really think the plated, buffered, 00 or 000 buck in 3" Super Magnum would be adequate for these dangerous bruins. Sorry to doubt you. Last edited by shortwave; December 29, 2011 at 08:53 PM.

December 29, 2011, 10:27 PM	#7
bedbugbilly Senior Member Join Date: November 19, 2009 Posts: 1,320	I'm pretty sure that was a smokeless round . . . ? The nice thing about those breeds of bears is that, unlike turkeys, they come already stuffed. __________________ If a pair of '51 Navies were good enough for Billy Hickok, then a single Navy on my right hip is good enough for me . . . besides . . . I'm probably only half as good as he was anyways. Hiram's Rangers Badge #63

December 29, 2011, 08:35 PM	#4
hoytinak Senior Member Join Date: July 5, 2006 Location: Texas Posts: 5,708	freakin' hilarious.....gotta share that vid with some buddies!

December 29, 2011, 08:43 PM	#6
rtpzwms Senior Member Join Date: July 6, 2010 Location: OTS Posts: 787	I thought they had Tannerite hearts... I may have to go hunting teddy bears!

December 30, 2011, 02:44 AM	#8
Hawg Haggen Senior Member Join Date: September 8, 2007 Location: Mississippi Posts: 10,240	Love that rug. __________________ http://blackpowdertimes.com/index.php

December 30, 2011, 06:26 AM	#9
Doc Hoy Senior Member Join Date: October 24, 2008 Location: Chesapeake, VA Posts: 3,348	Love it. Good job, Mike and nice Christmas present __________________ Doc My reading of history convinces me that most bad government results from too much government. Thomas Jefferson

December 30, 2011, 03:38 PM	#10
dlbarr Senior Member Join Date: October 8, 2011 Posts: 128	Hilarious! Hey Mike, where'd you get that trigger guard on the handi rifle and how did you attach it? I've got a 45-70 HR myself. Thanks for the entertainment!!

December 30, 2011, 03:44 PM	#11
illus1on Member Join Date: December 26, 2011 Location: BC, Canada Posts: 37	"Thats what teddy hunt'n is all about.." __________________ "God made man... But sam colt made em equal."

December 30, 2011, 04:15 PM	#12
Young.Gun.612 Senior Member Join Date: April 28, 2010 Location: Minneapolis, MN Posts: 387	Thank goodness you got those godless killing machines before they got you!

December 30, 2011, 04:33 PM	#13
duelist1954 Senior Member Join Date: March 14, 2011 Location: Central Pennsylvania Posts: 381	Hi Dlbarr, That was a small Kentucky rifle trigger guard I got from Dixie Gun Works many years ago. I cut off the old plastic trigger guard flush with the receiver. Then I inletted the tail of the new guard into the butt stock and secured it with a wood screw. Then I drilled and tapped the receiver for a 10x32 screw and used that to secure the front of the guard.

December 30, 2011, 04:39 PM	#14
dlbarr Senior Member Join Date: October 8, 2011 Posts: 128	Thanks Mike. I have a brass trigger guard or two laying around. I'll see if they might be a fit. Did you disassemble the action to cut that old plastic guard or did you just do it on the gun?

December 30, 2011, 05:35 PM	#15
duelist1954 Senior Member Join Date: March 14, 2011 Location: Central Pennsylvania Posts: 381	I just did it on the gun

January 2, 2012, 01:04 PM	#16
Hardcase Senior Member Join Date: April 14, 2009 Location: Sunny Southern Idaho Posts: 1,880	Boy, you'd think by now I'd know just what I should show my wife and what I should reserve for my own personal entertainment. She didn't see the same hilarity that I saw. It wasn't "doghouse bad", but apparently she has a softer spot for ursus theodori than I thought! __________________ Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae