The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old December 28, 2011, 05:10 PM   #1
hoytinak
Senior Member
 
Join Date: July 5, 2006
Location: Texas
Posts: 5,719
light weight, fairly tough, .22lr suppressor?

Haven't been on here in a while and starting a new project so I'm just starting my research. I'm putting together a light weight, .22lr (built off a Savage MKII) that I would be a suppressor host. I used to have an Outback II but this time I'm looking for something I can actually clean with ease. So what all new .22lr suppressor are out there that yall'd suggest? Doesn't have to be the quietest, but would like it to be light weight, fairly tough (think truck gun) and since it's just going on a bolt gun it doesn't need to be full-auto rated.
hoytinak is offline  
Old December 28, 2011, 06:09 PM   #2
Redneckrepairs
Senior Member
 
Join Date: March 9, 2006
Posts: 658
I have been researching my first can purchase myself , and as far as ease of cleaning goes i haven't seen anything that equals the sparrow .

http://www.silencerco.com/?section=P...s&page=Sparrow
Redneckrepairs is online now  
Old December 29, 2011, 07:38 AM   #3
rjrivero
Senior Member
 
Join Date: November 17, 2008
Location: NW Ohio
Posts: 1,350
I agree with redneckrepairs. The Sparrow is probably it. It does have a little bit of a first round pop but is oh, so easy to clean.
rjrivero is offline  
Old January 6, 2012, 08:45 PM   #4
HotGuns
Junior Member
 
Join Date: August 28, 2011
Location: Arkansas
Posts: 8
The best deal going is the Huntertown Arms. They are user servicable and can be had for around 220 bucks, but I have seen them as cheap as 185. Compared to the Sparrow or a Gemtech they all sound the same.
__________________
07/02 FFL
Maker of cool things to shoot...
HotGuns is offline  
Old January 8, 2012, 07:42 PM   #5
benfishin
Member
 
Join Date: July 4, 2011
Posts: 23
.22 Suppressor

I love my sparrow! It completely disassembles with your fingers, the registered part is the external tube (meaning the internal parts can be repaired/replaced without NFA hassle), it can be cleaned in a dip (all but the external tube) and it is quiet. You won't be sorry.
benfishin is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:42 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06740 seconds with 7 queries