The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting > Bullet Casting

Reply
 
Thread Tools
Old December 6, 2011, 05:39 AM   #1
Mike / Tx
Senior Member
 
Join Date: April 8, 2000
Posts: 1,316
Ranch Dog Molds...

I know there are a few who have a 41 magnum. Well if you ever wanted a good looking RFN TL type heavy boolit for it here's your chance at a good deal on the whole kit and kaboodle. Thought I would pass this on while supplies last.

Found this posted on RD's homepage,

"Check out the “Specials” listed in the box on the left side of this page.

Ranch Dog is discontinuing these items to make room for his 2012 offerings. Not only is now the time to take advantage of the discount pricing but these items may not be offered again."

TLC411-255-RF with .411 Lube & Size Kit plus 41 Mag FCD
$79.64
Save: 21% off

You can have it with or without the GC for a bit more or a combination of 3 each.

I have been wanting to get something like this so figured why not and picked up the whole kit. Since I have been playing with the Lee 300gr RF in my 45 Colt and 454 I have a whole new respect for the authority that these type boolits exhibit out to some pretty extended ranges.
__________________
LAter,
Mike / TX
Mike / Tx is offline  
Old December 6, 2011, 07:28 AM   #2
Koveras
Member
 
Join Date: April 6, 2002
Location: Oklahoma City, USA
Posts: 68
I can vouch for the quality of the RD molds and sizers. They work great!

But this particular bullet is designed for the Marlin 1894FG and will not chamber in a lot of 41 Mag revolvers due to the diameter of the nose portion.

My experience with my personal guns:

Ruger Redhawk: Works great
Taurus Raging Bull: Works great
Ruger Blackhawks: Depends on which one, generally will not chamber or chambers with difficulty.
S&W 657: Will not chamber

The above is using the bullet sized to .411" (the sizer included in the package deal) and seated to the crimp groove.

It is a good mold, but I don't want people to order this for their revolver and be disappointed and then have a negative view of RD products.
Koveras is offline  
Old December 6, 2011, 09:19 AM   #3
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
I went to his site and was confused by what seemed an oxymoron. "Lee custom" molds. Lee is a manufacturer. RD claims "custom" molds. But, reading his info on the site, he, indeed, does have his molds custom made by Lee. Pretty unique business model.
Rifleman1776 is offline  
Old December 6, 2011, 06:14 PM   #4
Mike / Tx
Senior Member
 
Join Date: April 8, 2000
Posts: 1,316
Koveras,

Thank you for bringing that up. Something I utterly failed to consider.
__________________
LAter,
Mike / TX
Mike / Tx is offline  
Old December 6, 2011, 09:20 PM   #5
grubbylabs
Senior Member
 
Join Date: October 11, 2009
Location: Hansen Idaho
Posts: 1,435
Yes Mike has his molds made my Lee. He seems to do a lot of testing with his designs and Lee is good enough to produce his designs which as I understand it only he sells on his web site.
__________________
* (Swinging club) Whack! whack! whack! *

Nope, the old nag's still dead .
(Capt Charlie)
grubbylabs is offline  
Old December 6, 2011, 10:28 PM   #6
TXGunNut
Senior Member
 
Join Date: January 16, 2010
Location: If you have to ask...
Posts: 2,851
That's my understanding as well. Seem to be very good if you like casting them hard and pushing them fast.
Looks like I'll get an opportunity to cast a few this week. Five day hunt became a two-day hunt. Headed home to play.
__________________
Life Member NRA, TSRA
Smokeless powder is a passing fad! -Steve Garbe
I hate rude behavior in a man. I won't tolerate it. -Woodrow F. Call Lonesome Dove
My favorite recipes start out with a handful of used wheelweights.
TXGunNut is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:16 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08074 seconds with 9 queries