The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old November 16, 2011, 07:19 PM   #1
apollo46
Junior Member
 
Join Date: November 14, 2011
Posts: 7
Semi-Auto For Skeet/Trap

I am looking to purchase a Benelli M2 Field 28" in near future. I mostly shoot trap/skeet style shooting, but I don't want to buy a traditional over/under, I don't have a semi-auto shotgun, and really want one.
Is this an ok purchase for my needs? I am purely recreational, but my start shooting at local range competitions.

Any other suggetions would be great. Budget is $1300 and under.

Thanks!
apollo46 is offline  
Old November 16, 2011, 07:39 PM   #2
upstate81
Senior Member
 
Join Date: October 20, 2011
Location: NY
Posts: 243
I am in your shoes right now. I own many guns but no brownings and I really like their new A5 in the 12 gauge hunter series not cheap but I'm sure ill find a deal eventually!
upstate81 is offline  
Old November 16, 2011, 07:52 PM   #3
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,227
Any gun you'll intend to shoot in the field ...can be used for casual clay target shooting as well. ...and in general, I'd go with a 28" or maybe a 30" barrel for a good all around gun in a semi-auto.

Nothing wrong with the Benelli - they're an Inertia system - they'll give you a little more recoil than a "gas operated" semi-auto / but the Inertia systems, at least in the Benelli, shoot very cleanly - so maintenance isn't an issue on them.

Lots of semi-autos out there ...Beretta is a leader in that platform ...and there are some under $ 1,300 ....and another gas gun is the Browning Silver series ...like the Hunter model ...and its under $1,000 ( all of the Berettas are gas guns / and so is the Browning silver series - checkout the Beretta website ...and you'll see at least a dozen semi-autos in their "field" guns and a dozen more in their "competition guns" ....and Browning makes about 14 different versions in the silver series.....
http://www.browning.com/products/cat...ilver-Shotguns

but if you like the Inertia - then go with the Benelli / and don't get talked into some of the other subsidiaries that make look alike inertia guns - like Stoeger - many of them have issues / where Benelli has little if any.

Depending on what you intend to use it for ...whether its a 3" chamber or a 3 1/2" chamber may affect your choices / but personally a 3" chamber does everything I need it to do.

Remember picking a shotgun is about "Fit" - so it hits where you look - since your eye is the rear sight ...so it isn't just about the mfg ...its about picking stock dimensions that "fit" you ...

Last edited by BigJimP; November 16, 2011 at 07:58 PM.
BigJimP is offline  
Old November 16, 2011, 07:55 PM   #4
stu925
Senior Member
 
Join Date: December 20, 2010
Location: New York
Posts: 942
If you don't mind a used gun you might see if you can find an old Winchester SuperX-1 Trap. I have one that I've had for 25 years+ and still powders targets like there's no tomorrow. Should be well within your budget and they're built like tanks. Beretta 391s have an excellent reputation also but probably out of your budget unless you can find a deal on a used one. You might try going to a large ATA shoot (state, zone or satellite Grand) to look for a deal, PA state shoot was always one of my favorites for all the vendors and dealers that show up. Large shoots are great places to pick up used guns since a lot of people upgrade there also. If you shoot trap with an autoloader you're going to want a shell catcher for singles, a lot of people get upset when they get pelted with empty hulls.

Stu
stu925 is offline  
Old November 16, 2011, 08:08 PM   #5
ammo.crafter
Senior Member
 
Join Date: June 25, 2006
Location: the Garden State
Posts: 754
semi

I use my Remington G3 20ga for sporting clays and upland birds and have problems.
it shoots like a dream and little noticeable recoil even with hunting loads.
__________________
"The Constitution is not an instrument for government to restrain the people, it is an instrument for the people to restrain the government, lest it come to dominate our lives and interests."
Patrick Henry, American Patriot
ammo.crafter is online now  
Old November 16, 2011, 08:58 PM   #6
apollo46
Junior Member
 
Join Date: November 14, 2011
Posts: 7
Ammocrafter.....do you mean you have no problems, or you do problems. I would be using mostly Winchester and federal loads, no heavy hunting loads.
apollo46 is offline  
Old November 16, 2011, 09:17 PM   #7
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
Good info above....

1100s need some small parts replaced regularly, but are well regarded by those that do.

No direct experience with the Berettas other than this A400 I'm testing, but they have lots of happy owners. Again, some PM is a very good idea.

Few Benellis seem to find themselves on the range, but no complaints there either.

Best advice I can give is, get the one that FEELS best...
Dave McC is offline  
Old November 16, 2011, 09:24 PM   #8
TheKlawMan
Junior member
 
Join Date: June 23, 2009
Location: Orange County, CA
Posts: 2,149
All I know about Benelli SuperSports is that BigJimP has one and likes, one of the staff at the range got one a few months ago and feels the same, Weatherby shot one the other day and had kudos for it, and while I haven't shot it the SuperSport seems to fit me best of anything. I dind't buy one because I wanted wood, a parallel stock, and I was on the fence about semi or o/u. I have sbot a couple trap rounds with a friends Cordoba and it is a nice shooter.
TheKlawMan is offline  
Old November 16, 2011, 10:01 PM   #9
ammo.crafter
Senior Member
 
Join Date: June 25, 2006
Location: the Garden State
Posts: 754
G3

Beretta and Benellis are excellent. I'm just a Remington fan as they fit me very well. As for any gas operated semi, it is imperative that it is cleaned very often and especially the gas ports.

I have no trouble using 7/8 ounce loads for clays and no problem using 1 ounce heavy loads for pheasants.
__________________
"The Constitution is not an instrument for government to restrain the people, it is an instrument for the people to restrain the government, lest it come to dominate our lives and interests."
Patrick Henry, American Patriot
ammo.crafter is online now  
Old November 16, 2011, 10:56 PM   #10
joegator
Senior Member
 
Join Date: April 11, 2008
Location: Florida
Posts: 531
The M2 is a great gun and although I own 5 shotguns including 2 over and unders I am considering getting one myself.

The inertia system makes the gun very easy to break down and clean. Because it is not gas operated it will stay clean like a pump since you won't have the gas ported back into the chamber.

It will kick slightly harder than a gas gun but there are plenty of AA light 1 oz. rounds available that are softer on the shoulder than field rounds.

Dicks sells the American version of the M2. You can pick one up for $799. It's a great deal, you just won't be getting the high end stock but you save about $400. You can't go wrong with an M2. This is one of the preferred guns of dove hunters in South America that will put thousands of rounds thru their gun on a trip.
joegator is offline  
Old November 17, 2011, 12:53 AM   #11
Jim Watson
Senior Member
 
Join Date: October 25, 2001
Location: Alabama
Posts: 10,919
Skeettrap is not all one word and it is not the same game.
A trap gun is more specialized than a skeet gun.
You can do quite well at skeet with a standard field model gun and cylinder or improved cylinder choke. Put in a modified or full choke and you can get by at trap but it is not an optimum choice.

I recommend starting at skeet. I learned trap and have always found skeet difficult, but people who got the basics at skeet seem to transfer to trap ok.
Jim Watson is offline  
Old November 17, 2011, 08:27 AM   #12
OkieCruffler
Senior Member
 
Join Date: July 9, 2001
Location: Denison Texas on the banks of Texhoma
Posts: 1,483
The only auto I have any experience with is the 1100 and I really liked it. Is the part replacement why I hardly ever see anyone recomend it?
__________________
John A. Monroe, Never Forgive, Never Forget, Blood Pays Blood
OkieCruffler is offline  
Old November 17, 2011, 08:29 AM   #13
Slugo
Senior Member
 
Join Date: September 15, 2001
Location: Central PA
Posts: 1,007
nothing at all wrong with the M2! Maybe the best all-around autoloader...
__________________
Sometimes wrong, but never in doubt...
Slugo is offline  
Old November 17, 2011, 09:08 AM   #14
Boom Boom Boom
Junior Member
 
Join Date: November 16, 2011
Posts: 12
Fully agree-for an all purpose gun you cant beat an M2. the comfortech stock will take much of the felt recoil away negating the difference in recoil for gas vs inertia.

My M2 has been used for any sport/game/hunt you can name, and i would trade it for anything.
Boom Boom Boom is offline  
Old November 17, 2011, 11:14 AM   #15
sweetshot
Member
 
Join Date: February 28, 2011
Location: Minnesota
Posts: 45
I've got an M1 Super 90 20 ga. and an M2 12 ga. that are my field guns and occasionally shoot them for trap practice. Benelli offers longer recoil pads so you can even fit your LOP, (for the M2, 'cept the longest one in right hand version is on backorder....). I'd recommend the M2 just based on versatility and price from the larger chambered SBE's, and I never shoot anything larger than 3" anyway in the field, and 2.75" on the range.
sweetshot is offline  
Old November 17, 2011, 12:07 PM   #16
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
Another to consider is the 391 Beretta - excellent gas gun and seen on the sporting courses more and more
oneounceload is offline  
Old November 17, 2011, 02:38 PM   #17
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
1100s have O rings that need replacing, some fairly often, some not. The springs should be replaced every 10K rounds, according to Bruce Buck.

Autoloader fans have moved on to newer models like the various B guns, but there's no flies on the 1100. Like the 870, the 1100 seems to fit an awful lot of people without modification, and there's tons of aftermarket goodies for it.

I do like the Beretta and Benellis, but were I campaigning an autoloader for clays(and I may at some point), it would more likely be an 1100 with a fitted stock, perhaps a Baker barrel, and a spare parts kit.

That would include a few O rings. a spare link, a bolt and an extra handle.
Dave McC is offline  
Old November 17, 2011, 08:54 PM   #18
zippy13
Senior Member
 
Join Date: August 23, 2008
Location: SoCal
Posts: 6,392
My under $1300 Skeet/Trap solution is a Remington 1100 Trap model with an extra barrel cut to Skeet length and choked. Where a field gun may be okay for Skeet's crossing targets, they don't do as well at Trap. A Trap gun's higher stock and rib are a real advantage when shooting Trap's rising targets and aren't a significant detriment on the Skeet field.
zippy13 is offline  
Old November 17, 2011, 09:41 PM   #19
krimmie
Senior Member
 
Join Date: February 11, 2007
Location: S. Florida
Posts: 164
I shoot a Beretta when waterfowl hunting, but the 1100 Sporting is my clays gun.
krimmie is offline  
Old November 17, 2011, 11:59 PM   #20
OkieCruffler
Senior Member
 
Join Date: July 9, 2001
Location: Denison Texas on the banks of Texhoma
Posts: 1,483
I absolutely love my .410 1100. I've been looking at a 12ga for $250 that needs a refin on the wood. I have no use for it but hard to pass up for that price.
__________________
John A. Monroe, Never Forgive, Never Forget, Blood Pays Blood
OkieCruffler is offline  
Old November 18, 2011, 09:23 AM   #21
andhen2003
Member
 
Join Date: October 25, 2011
Posts: 61
I just got a Beretta AL391 yesterday and will be shooting clays with it next week. Great gun. I got it for $840 from bud's gun shop, which I believe is at least $300 below retail. I've used only this model gun because it's the loaner at the range I go to, but it shoots great and was recommended to me by a friend who works for the NRA, for what I'm interested in, which is sporting clays, and pheasant hunting. I will let you know what I think when I get my new 391 into action next week.
andhen2003 is offline  
Old November 19, 2011, 06:36 PM   #22
apollo46
Junior Member
 
Join Date: November 14, 2011
Posts: 7
Thanks AndHen....I'd be interested to hear whatcha think.
apollo46 is offline  
Old November 19, 2011, 08:17 PM   #23
seansean1444
Senior Member
 
Join Date: November 28, 2010
Location: ithaca, new york (home of the ithaca shotguns!)
Posts: 395
remington 1100 imho
seansean1444 is offline  
Old November 19, 2011, 11:10 PM   #24
apollo46
Junior Member
 
Join Date: November 14, 2011
Posts: 7
Going this weekend to check out some of the models you guys suggested. I'll report back soon!
apollo46 is offline  
Old November 20, 2011, 05:27 PM   #25
M4BGRINGO
Senior Member
 
Join Date: March 22, 2011
Posts: 241
I have a couple of 870's and 1100's, besides my Browning O/U.

I usually shoot 21 - 23 with my 1100, bought it used with a 30" and a 28" barrel. I shoot Sporting Clays and Trap with this gun. I did cut the stock a little shorter and added a better recoil pad on it. Almost don't feel it kick when I shoot it. I bought a metal clip from Brownells that stops the shells from getting ejected and hitting the person to the right of you. Makes it a little tougher to load it, have to do a k-turn with the shell, but once you have done it a few times you will see it's simple!
M4BGRINGO is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:06 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.12199 seconds with 7 queries