October 30, 2011, 03:37 PM | #1 |
Junior Member
Join Date: October 30, 2011
Posts: 4
|
USGI mag refinishing
Hello everybody. This is the first time I have posted on here. Actually just signed up for an account yesterday. The reason I am posting, is that I have a boat load of old USGI mags that I would like to refinish. I have PMAGs that I use for compititions, but I have these lying around.
I plan on replacing the springs and followers. Those first two things are quite self explanatory. However, I have never refinished anything. What is a good way to go about that. What supplies, methods and how long will it take etc... Thank you all in advance for your responses. |
October 30, 2011, 05:24 PM | #2 |
Senior Member
Join Date: September 28, 2008
Posts: 10,442
|
Here's the method I use:
Get the mags really clean and rust free. Steel wool is good, followed by an alcohol rub. But only use pure alcohol, not rubbing alcohol. which has oils in it. Acetone and mineral spirits works, too, if you can stand them. Get the mags dry and, Then just use a bluing agent, like the Birchwood-Casey paste. Hope this helps.
__________________
Walt Kelly, alias Pogo, sez: “Don't take life so serious, son, it ain't nohow permanent.” |
October 30, 2011, 06:52 PM | #3 |
Junior Member
Join Date: October 30, 2011
Posts: 4
|
Off the top of your head, do you know how many mags a tube of the B&C paste will do?
|
October 31, 2011, 07:53 AM | #4 |
Senior Member
Join Date: September 28, 2008
Posts: 10,442
|
A little dab will do ya'.
I'm still using the same tube of it that I bought fifteen years ago.
__________________
Walt Kelly, alias Pogo, sez: “Don't take life so serious, son, it ain't nohow permanent.” |
October 31, 2011, 08:21 AM | #5 |
Senior Member
Join Date: October 25, 2001
Location: Alabama
Posts: 18,453
|
M16 magazines, not 1911? I ask because I don't know of a pistol PMAG.
Most of those are aluminum and don't take conventional bluing. Anodizing is expensive or a more complicated DIY, the usual refinish on these is one or another spray n bake. Or just spray, like Duracoat. |
October 31, 2011, 12:29 PM | #6 |
Senior Member
Join Date: September 28, 2008
Posts: 10,442
|
Here's something for aluminum that looks easy to use:
http://sport.birchwoodcasey.com/Fini...a-8820790beefb
__________________
Walt Kelly, alias Pogo, sez: “Don't take life so serious, son, it ain't nohow permanent.” |
October 31, 2011, 07:16 PM | #7 |
Junior Member
Join Date: October 30, 2011
Posts: 4
|
Yes M16 mags, not 1911.
Last edited by abeckSWMP; October 31, 2011 at 07:17 PM. Reason: Spelling |
November 1, 2011, 06:41 AM | #8 |
Member
Join Date: October 10, 2011
Location: Camp Lejeune, NC
Posts: 79
|
The military uses Solid Film Lubricant, SFL. i reccomend it highly but ti can be expensive//difficult to find sometimes.
__________________
To sum it up: Somewhere there is a TRUE BELIEVER training, he will not stop in his mission, he knows only the cause. What have you done today? For your brothers at arms, friends, family, your country, yourself? |
November 1, 2011, 08:08 AM | #9 |
Senior Member
Join Date: December 4, 2004
Posts: 283
|
The mags would need to be totally stripped down to bare aluminum. Then they go thru an acid bath , then they get iridited (that gold color underneath, stops corrosion) then the top SFL mentioned.
|
Tags |
ar 15 , magazine , maintenance , refinishing , rifle |
Thread Tools | Search this Thread |
|
|