The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old October 28, 2011, 09:42 AM   #1
rbursek
Senior Member
 
Join Date: March 30, 2011
Location: Milwaukkee, WI
Posts: 152
Lee Loaders

I used to have a RCBS Rock Chucker it and all the reloading stuff with it got lost in a move. Are the Lee presses as stiff as the RCBS/Hornady's, I will be reloading rifle only and do not want a springy press. But right now on a buget, but do not want to buy something that cost less to be unhappy with every stroke of the arm either.
Bob
rbursek is offline  
Old October 28, 2011, 10:06 AM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,247
Look at the "Remember These" thread and you'll see what a Lee Loader is. What you are asking about is Lee loading presses. Different animal. If you buy the Lee Classic Cast press, it is cast iron and every bit as rigid as the other presses you mentioned, plus having a bigger throat and at less than half the price, especially if you catch a sale. Best single-stage press bargain available, IMHO.

If you go to their Classic Cast Turret Press, it is also rigid and you get more features, but it costs more, too. Your choice.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old October 28, 2011, 10:27 AM   #3
boggs,jeff
Junior Member
 
Join Date: September 2, 2011
Location: Pound, Va.
Posts: 14
Lee classic works great for me. The only Lee product I have not been completly satisfied with is thier safety scale.
boggs,jeff is offline  
Old October 28, 2011, 10:46 AM   #4
overkill0084
Senior Member
 
Join Date: August 7, 2010
Location: Northern, UT
Posts: 1,162
The Lee "Classic" line of presses will do just fine. The Classic Cast and the Classic Turret are both good products. I own the Classic Turret. I also have a Lee Breech Lock challenger which was fine as well. Just a bit slow for my needs on handgun calibers. For many rifle calibers, it would likely work ok. Bigger magnum stuff might not be ideal, however. If you going to find flex...

+1 on the Lee scale. I used the Lee scale once, and only once. While it will do the job, I found it unnecessarily cumbersome.
__________________
Cheers,
Greg
“At the core of liberalism is the spoiled child – miserable, as all spoiled children are, unsatisfied, demanding, ill-disciplined, despotic and useless. Liberalism is a philosophy of sniveling brats.” — P.J. O’Rourke
overkill0084 is offline  
Old October 28, 2011, 11:12 AM   #5
humanoid
Member
 
Join Date: September 29, 2007
Location: Houston, TX
Posts: 26
I have the turret and it works very well. I like how you can buy extra plates and leave your dies set up in them. It really speeds up changing calibers.
humanoid is offline  
Old October 28, 2011, 05:31 PM   #6
rbursek
Senior Member
 
Join Date: March 30, 2011
Location: Milwaukkee, WI
Posts: 152
Yes I did mean a press like the Classic, but you figured that out because I was comparing it to a Rock Chucker.
Bob
rbursek is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06899 seconds with 7 queries