The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old September 17, 2011, 02:46 PM   #1
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,249
The one!

Finally I found the load for my Savage 110 .270 win. It's a 130 grn Accubond, 53 grns H4350, CCI 200 large rifle primers, Hornady brass, oal is 2.856. here is some pics,,,,, It was 57 degrees, no wind of course, 100 yds.
__________________
Thanks for coming!

Last edited by hooligan1; February 4, 2012 at 03:14 PM.
hooligan1 is online now  
Old September 17, 2011, 04:06 PM   #2
William T. Watts
Senior Member
 
Join Date: January 20, 2010
Location: Central Arkansas
Posts: 752
OAL

3.285" would sound better, my model 70 featherweight 270Win has a long throat that will allow a full 3.340" OAL with Nosler 150's... Terrific groups though, congratulation on the fine shooting!! William
William T. Watts is offline  
Old September 17, 2011, 06:00 PM   #3
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,249
Sorry WTW, I'm zeroing my calipers after I attach my comparator!!
__________________
Thanks for coming!
hooligan1 is online now  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:51 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05507 seconds with 9 queries