The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old September 19, 2011, 10:03 AM   #1
pck823
Member
 
Join Date: July 6, 2007
Location: Georgia
Posts: 73
New to me and questions

Was at the local pawn shop and made an impulse purchase of an integrally supressed Ruger Mk III made by Johns Guns in Plano Tx. From the little I know about the value of guns like this I thought it was a great buy at 800 bucks. What do you all think? Let the waiting begin!

Are these decent pistols? What do I need to know that's not obvious? Thanks in advance.




Last edited by pck823; September 19, 2011 at 01:01 PM.
pck823 is offline  
Old September 20, 2011, 02:16 PM   #2
pck823
Member
 
Join Date: July 6, 2007
Location: Georgia
Posts: 73
78 views and not one comment? Not even a "...you got ripped off dude!"

Just looking to hear from those of you with more NFA experience whether or not this is a good/bad buy and what sort of care and feeding does this style of supressor require...
pck823 is offline  
Old September 20, 2011, 02:53 PM   #3
Willie Lowman
Senior Member
 
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 2,415
You are the one that bought it. Why don't you tell us.

Is it a sealed can or is it possible to take the suppressor apart for cleaning?

You will need to clean the bolt/action area much more often than you would with a regular Ruger Mk III.
Willie Lowman is offline  
Old September 20, 2011, 05:34 PM   #4
Skans
Senior Member
 
Join Date: November 20, 2008
Posts: 7,766
I was wondering the same thing - how do you clean it? How is it constructed? Integrally suppressed Mark II's are supposed to be nearly silent (except for the action). Value? Hard to say - I thought these sell for between $600 and $800 - but I'm going on old data.
Skans is offline  
Old September 20, 2011, 05:39 PM   #5
pck823
Member
 
Join Date: July 6, 2007
Location: Georgia
Posts: 73
Well, what I didn't mention was that this is the first NFA and first supressor/supressed weapon I've purchased so I can't say for sure. Looking at the business end of the weapon, it looks like there are two opposing holes that look to be for a spanner/pin wrench to remove the end off of the supressor so my guess is that it is removable and thusly cleanable.

I've heard through various sources (that are more or less internet trolls) that John's Guns makes a fine weapon. The only other I've seen like this are the integrally supressed Gemtech Oasis (that is no longer offered) and the Amphibian made by AWC. That's all I know.

A little conversation never hurt anyone and that's all I'm really after
pck823 is offline  
Old September 20, 2011, 07:07 PM   #6
Joat
Senior Member
 
Join Date: March 31, 2008
Location: Dayton, TX
Posts: 383
The integrally suppressed 22's from John's Guns do come apart for cleaning you need a tool like this or a pin wrench to get the end cap off. For $800 it sounds like an ok buy if it's in good shape new the list for $995.

Joat
__________________
All things being equal, fat people use more soap. (I know I am one.) High speed, low drag does not even come close to describing ME.
Joat is offline  
Old September 20, 2011, 07:54 PM   #7
pck823
Member
 
Join Date: July 6, 2007
Location: Georgia
Posts: 73
Are these considered 'dry' supressors?
pck823 is offline  
Old September 20, 2011, 09:13 PM   #8
Willie Lowman
Senior Member
 
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 2,415
Quote:
I've heard through various sources (that are more or less internet trolls)
So, you mean people like the ones that may be responding to your thread?

.22 cans are dry cans.

There is no reason you couldn't shoot it wet if you wanted. It might be even more ridiculously quiet.

My .22 Sig Mosquito/Spectre is as quiet to my ear as my buddy's AWC Amphibian. I would liken the two of them to a cap pistol.

Your mileage may vary and all that stuff.
Willie Lowman is offline  
Old September 22, 2011, 01:29 AM   #9
David Hineline
Senior Member
 
Join Date: December 23, 1999
Location: South Sioux City, Nebraska
Posts: 703
I have bought products from John's Guns for almost 20yrs now.

Never have I known them to be from Plano TX.

Current production is in Coleman TX.

Anyway it should be the newest design since it is a MKIII and should come with a takedown tool that fits a std. 3/8" ratched drive.

you are going to want to clean the baffle stack every 500 rnds or so, if you got 2000 you will most likely never get it apart.
David Hineline is online now  
Old September 22, 2011, 12:04 PM   #10
pck823
Member
 
Join Date: July 6, 2007
Location: Georgia
Posts: 73
Well, the few notes I jotted down when I saw it showed on the receiver:
John's Guns
Plano (or Pals?), TX
P-1275
Serial # 227-03XXX

Maybe a fake?
pck823 is offline  
Old September 22, 2011, 01:06 PM   #11
David Hineline
Senior Member
 
Join Date: December 23, 1999
Location: South Sioux City, Nebraska
Posts: 703
http://www.fullysuppressed.com/index.html


Anyway it will be fine even though it did not come from Plano, TX. It should come with the takedown tool though.
David Hineline is online now  
Old September 22, 2011, 01:11 PM   #12
Don H
Senior Member
 
Join Date: May 8, 2000
Location: SLC,Utah
Posts: 2,705
From http://www.johnsguns.us/contact.htm
Quote:
John's Guns
1041 FM 1274
Coleman, TX 76834
Don H is offline  
Old September 22, 2011, 03:53 PM   #13
RAnb
Junior member
 
Join Date: July 20, 2008
Location: WA, USA
Posts: 447
The owner was not willing to demo the pistol for you? Post on SilencerTalk and there should be someone who has one and can offer an opinion.

Ranb
RAnb is offline  
Old September 22, 2011, 06:47 PM   #14
pck823
Member
 
Join Date: July 6, 2007
Location: Georgia
Posts: 73
It was an impulse purchase at a pawn shop that doesn't have a range they did offer the opportunity to shoot it but I went ahead and bought it. It is second hand and there is no box or pin wrench for the end of the can. I can make one fairly easily. I have to go back in this weekend to give them the fingerprint cards and pics for the paperwork. I'll take pics of the barrel markings.
pck823 is offline  
Old September 23, 2011, 02:36 PM   #15
RAnb
Junior member
 
Join Date: July 20, 2008
Location: WA, USA
Posts: 447
Not a good move. It could be a quality made piece that is full of gunk and shooting loud. If it needs service, then any good class 2 can probably do it.

Ranb
RAnb is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:01 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.10137 seconds with 9 queries