The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 26, 2011, 01:24 AM   #1
trg42wraglefragle
Senior Member
 
Join Date: April 21, 2008
Location: new zealand
Posts: 819
Shotgun Reloading

Hi,
I recently asked a question about poor patterning with buckshot, and was told I should try buying good quality (with means stupidly expensive) ammo.
So I was wondering, can you reload your own buckshot ammo that has the good patterning you get from using Premium ammo like the Federal Flight control stuff.

Thanks.
trg42wraglefragle is offline  
Old August 26, 2011, 02:06 AM   #2
Edward429451
Junior member
 
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
I don't know because I have never loaded and patterned buckshot. I do know that I am basically a novice shotgun reloader and I cast and loaded slugs on my first try that let me hit a 12 X 24 target at 100 yds repeatedly with an 18" police barrel and a bead, offhand. With factory slugs I'm good only out to about 50 or 60 yards with them so this was such a significant improvement that I would say yes I bet you can. I'd look for a buckshot load using Unique powder if it was me.

Sorry I don't have the load for you.
Edward429451 is offline  
Old August 26, 2011, 02:45 AM   #3
Missionary
Member
 
Join Date: June 2, 2011
Posts: 78
Good morning
Yes you can reload buckshot that will pattern as good as expensive factory produced ammo.
I highly recommend you purchase Lymans rescent edition of shotgun loading. Also BPI (Balistics Products Inc) has a great site for shotgun wads and reloading supplies that will help you along.
Consider also the Castboolits site as there there a board devoted to Shotgun Reloading and numerous threads exist all about buckshot does & donts.
Personally I view buckshot as a hunting / repel boarders load out to 20 yards max. Then I would swtch to round ball for out to 40 yards. If I need more distance than that then I would be switching to a rifle of caliber.30 and happily reaching out accurately.
Mike in Peru
Missionary is offline  
Old August 26, 2011, 08:00 AM   #4
243winxb
Senior Member
 
Join Date: July 26, 2011
Posts: 921
Your handloads will need a plastic buffering agent & very hard shot or plated shot. To much choke (full) can deform the shot on firing, making it not round anymore. Round shot flys/groups better. Balistics Products should have the components you need. Lower velocity loads will pattern tighter than high velocity. On firing there is less set back of the pellet, causing flat spots.
243winxb is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06255 seconds with 7 queries