Problem with Beretta sling swivel stud

Timbow · August 20, 2011, 01:47 PM

I just purchased a new end cap for my Xtrema 2 with a sling swivel stud on it. The problem is, the hole in the stud is too small for the post on a swivel to fit. Could it have been drilled wrong or are there different sizes of posts on sling swivels? Any help/suggestions would be greatly appreciated.

oneounceload · August 20, 2011, 01:59 PM

This shows a sling swivel, but then goes on to say it is discontinued:

http://www.cheaperthandirt.com/16312-1.html

You might try calling Beretta USA

Timbow · August 20, 2011, 02:26 PM

I ordered the aftermarket cap from Beretta that has the swivel stud on it. The problem is, the hole in the stud is too small and the swivel won't fit in it.

**hogdogs** · August 20, 2011, 02:29 PM

your cap may have missed the thread cutting process?

Brent

Pahoo · August 20, 2011, 03:11 PM

I've had studs whose hole were a tad undersized and both were from the same manufacture. I'm just talking about a slight undersize and did not take much to open up the clearance. Now, if your is grossly undersized, then I'd send it back or get an explaination on what swivel to use. I know how you hate to cut into that blueing. ...

Be Safe !!!

Timbow · August 21, 2011, 12:03 AM

Problem solved. Went back to Bass Pro this evening and tried an Uncle Mike's swivel and it just fits. The threaded post on the swivels I was trying to use was just slightly too big. Looks like it's gonna work great. Thanks for the suggestions.

August 20, 2011, 01:47 PM	#1
Timbow Senior Member Join Date: January 28, 2008 Posts: 166	Problem with Beretta sling swivel stud I just purchased a new end cap for my Xtrema 2 with a sling swivel stud on it. The problem is, the hole in the stud is too small for the post on a swivel to fit. Could it have been drilled wrong or are there different sizes of posts on sling swivels? Any help/suggestions would be greatly appreciated.

August 20, 2011, 02:29 PM	#4
hogdogs Staff Join Date: October 31, 2007 Location: Western Florida panhandle Posts: 10,720	your cap may have missed the thread cutting process? Brent __________________ Finally have designs going up in the Hogdogs Outdoor Apparel online store. http://www.cafepress.com/hogdogsoutdoorapparel Thanks for lookin'...

August 20, 2011, 03:11 PM	#5
Pahoo Senior Member Join Date: February 16, 2006 Location: IOWA Posts: 4,504	Rare, but it happens. I've had studs whose hole were a tad undersized and both were from the same manufacture. I'm just talking about a slight undersize and did not take much to open up the clearance. Now, if your is grossly undersized, then I'd send it back or get an explaination on what swivel to use. I know how you hate to cut into that blueing. ... Be Safe !!! __________________ 'Fundamental truths' are easy to recognize because they are verified daily through simple observation and thus, require no testing.

August 20, 2011, 01:59 PM	#2
oneounceload Junior member Join Date: April 18, 2008 Location: N. Central Florida Posts: 8,518	This shows a sling swivel, but then goes on to say it is discontinued: http://www.cheaperthandirt.com/16312-1.html You might try calling Beretta USA

August 20, 2011, 02:26 PM	#3
Timbow Senior Member Join Date: January 28, 2008 Posts: 166	I ordered the aftermarket cap from Beretta that has the swivel stud on it. The problem is, the hole in the stud is too small and the swivel won't fit in it.

August 21, 2011, 12:03 AM	#6
Timbow Senior Member Join Date: January 28, 2008 Posts: 166	Problem solved. Went back to Bass Pro this evening and tried an Uncle Mike's swivel and it just fits. The threaded post on the swivels I was trying to use was just slightly too big. Looks like it's gonna work great. Thanks for the suggestions.