The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old August 5, 2011, 09:42 PM   #1
buckshot22
Junior Member
 
Join Date: August 5, 2011
Location: Washington
Posts: 5
New Loader Question

Hey folks. I'm new to the forum and new to reloading. However, not new to guns. (retired military)

I have an inconsistancy that has me concerned. I just punched out my first batch of 9mm with 115gr copper plated round nose with Unique and cci primers.

Could not (useless story goes along with how I ended up with Unique) find loading data for this combo until I contacted the bullet maker. They gave two bits of info:

1-use recipe for jacketed bullets

2-go with 5.6gr mol 1.139

Now that you have the facts, here's the real question.

I use the Lee disc system to dispense powder. I used disc .53 which is supposed to dispense 4.9gr.

I checked this with the Lees bar scale and it weighed 3.9gr.

I also used the Lee scoop .5 (this is listed in the Lee recipe) and it also scaled at 3.9gr.

Which one should I believe? Does it matter?

I would appreciate any info from you experienced loaders.

Thanks
buckshot22 is offline  
Old August 5, 2011, 09:47 PM   #2
mikejonestkd
Senior Member
 
Join Date: January 3, 2006
Location: Brockport, NY
Posts: 2,761
Welcome to the forum, you'll find lots of great help here.

My 2 cents on your particular situation is that Unique does not consistently dispense well through Lee auto disk measures. I have a good amount of experience with both Unique powders and Lee auto disk measures and my conclusion is that the two should never be used together...

either switch powders or use a different dispenser. Its odd that the dipper is light too though, are you sure that the scale is zeroed?

Hope this helps
__________________
You are the bows from which your children as living arrows are sent forth.
mikejonestkd is offline  
Old August 5, 2011, 09:51 PM   #3
buckshot22
Junior Member
 
Join Date: August 5, 2011
Location: Washington
Posts: 5
Thanks for the info. Scale is zeroed per the instructions. Any recommendations on powder that feeds well in lee equipment?
buckshot22 is offline  
Old August 5, 2011, 10:01 PM   #4
chris in va
Senior Member
 
Join Date: December 26, 2004
Location: Louisville KY
Posts: 12,542
Universal, Bullseye, W231...
chris in va is offline  
Old August 5, 2011, 10:13 PM   #5
Lost Sheep
Senior Member
 
Join Date: January 24, 2009
Location: Anchorage Alaska
Posts: 3,017
Weight it and use it.

Welcome, and thanks for asking our advice.

Lee dippers are notorious for weighing light. Same for their Auto-Disk and the chart that accompanies the Autodisk and the dippers.

The way to use the dippers or Auto-disk is to measure out several charges and observe what the average weight is. If it is lighter than your desired weight, pick a dipper or a cavity that does deliver what weight you want.

Always make sure your technique is consistent and delivers consistent charges. This is the biggest difficulty in using any powder measuring device.

I have used Unique for decades in most of my pistol rounds (357, 9mm, 45 ACP 44 Mag for mid-range light recoiling loads, and recently, 45 Colt and 454 Casull for light loads. The accuracy of the Auto-Disk has been acceptable. I have been re-evaluating my powder choices lately, though and will revisit my thoughts on the matter, however.

If you want to go with the chart and the cavity recommended, I suggest you load 5 founds at that charge weight and see if there is enough oomph to cycle your action. I put some of my lightly loaded .357 rounds through my friend's Coonan and none of them had the juice to cycle the action. I used to load my 45 ACP right on the edge of being able to cycle my Gold Cup Colt 45. If I held the gun very tightly, it would cycle. If I held it the least bit loosely, I would get stovepipe jams every time. Cool, clearance drills at the range at will.

Lost Sheep
Lost Sheep is offline  
Old August 5, 2011, 11:31 PM   #6
buckshot22
Junior Member
 
Join Date: August 5, 2011
Location: Washington
Posts: 5
Awesome input. Quick and on point. Thanks for all the info. Glad I joined.
buckshot22 is offline  
Old August 6, 2011, 10:42 AM   #7
Jim243
Senior Member
 
Join Date: January 5, 2009
Location: Just off Route 66
Posts: 4,575
Short answer - use Win 231

Jim
__________________
Si vis pacem, para bellum
Jim243 is offline  
Old August 6, 2011, 11:30 AM   #8
farmerboy
Junior member
 
Join Date: May 16, 2009
Location: Central Texas
Posts: 1,343
my answer would be to get or if you do , to use a beam scale and get what youre looking for from your dispenser. Not the dippers, Screw the dipper method. And I also like Unique very well.
farmerboy is offline  
Old August 6, 2011, 12:11 PM   #9
overkill0084
Senior Member
 
Join Date: August 7, 2010
Location: Northern, UT
Posts: 1,162
When Unique was giving me fits with my Lee Perfect Powder measure, I switched to AA#5. Measures very nicely. I don't use Unique with my 115 gr (Rainier) plated. 4.0 gr of Bullseye works well in my CZ. HS-6 is very good for hotter jacketed stuff.
__________________
Cheers,
Greg
“At the core of liberalism is the spoiled child – miserable, as all spoiled children are, unsatisfied, demanding, ill-disciplined, despotic and useless. Liberalism is a philosophy of sniveling brats.” — P.J. O’Rourke
overkill0084 is offline  
Old August 6, 2011, 12:13 PM   #10
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,327
Buckshot22,

If you visit the Accurate web site, you'll see they list VMD's for all their powders, plus give a tolerance for how accurate those numbers are. ±3% is common and some are over ±5%. I wish Alliant and the other makers gave that information, too, because it give you some sense of how accurate your dippers and disks or Perfect CC settings can be expected to be.

Lee's table seems to make sure you won't over-charge by being on the light side with most powders. So don't be surprised if you need to go up a size. Just weigh the result to be sure.

Hodgdon Universal will do most of what Unique does, and it meters better, as already mentioned, and it also burns cleaner, which I like. Typically its charges are maybe around 5% lighter than Unique to reach similar peak pressures. 231 will meter well in most measures, but you can't load it safely to quite as high a velocity as Unique because of its faster burn rate. If you want something that meters about like 231l but reaches higher load performance while still at safe pressures, take a look at Alliant Power Pistol.
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old August 6, 2011, 01:34 PM   #11
mikld
Senior Member
 
Join Date: February 7, 2009
Location: Southern Oregon!
Posts: 1,112
Get an adjustable powder measure. Powders will vary in weight depending on relative humidity and lot to lot differences. It's very difficult to say xx ccs of Unique from 1989 weighed in Oregon will be the same as xx ccs 2010 Unique measured in So. CA. I made some custom dippers for my powders/loads when I lived in So. CA in the early 90s which weigh differently now in rainy Oregon. My suggestion would be to get an adjustable powder measure and set it each time you use it, checking it against a beam scale...
__________________
My Anchor is holding fast!
mikld is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:32 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06721 seconds with 7 queries