The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old July 21, 2011, 02:12 AM   #1
johnte67
Junior Member
 
Join Date: July 21, 2011
Location: kansascity
Posts: 2
please help

my name is john i bought a lyman t mag not to mag 2 and i have lost the retainer/oring assembly along with the 2 keepers thats my bad but i cant find then any were.can any one help this is a nice reloader my first in]m just getting in to it but ive talked to the lyman consultant and they dont make those parts anymore i desperatly need these parts this reloader is to nice to use for a paper wait.secont question ive been looking at the t mag 2 turrets and everthink i read day t mag and t mag 2 turrets can interchange can the turrent shoulder bolt from the t mag 2 work on my t mag thanks for your help
johnte67 is offline  
Old July 21, 2011, 08:14 AM   #2
Unclenick
Staff
 
Join Date: March 4, 2005
Location: Ohio
Posts: 10,247
Welcome to the forum.

I suggest you use the board's private message feature to contact board member F. Guffey. He has quite a collection of gear. I don't know that he will have spares or parts for your press, but he might know what you would need to get as replacements (dimensions, thread pitch on bolts, etc).
__________________
Gunsite Orange Hat Family Member
CMP Certified GSM Master Instructor
NRA Certified Rifle Instructor
NRA Benefactor Member
Unclenick is offline  
Old July 21, 2011, 02:25 PM   #3
johnte67
Junior Member
 
Join Date: July 21, 2011
Location: kansascity
Posts: 2
that you very much you are a good man
johnte67 is offline  
Old July 21, 2011, 02:49 PM   #4
TATER
Senior Member
 
Join Date: November 19, 2002
Location: Mississippi
Posts: 912
I see parts come up all the time on eBay as well. You kinda have to know what you are look'en at sometimes
because they may not have a clue.
TATER is online now  
Old July 24, 2011, 12:20 PM   #5
Smokey Joe
Senior Member
 
Join Date: July 14, 2001
Location: State of Confusion
Posts: 2,064
Old fashioned...

John TE 67--Firstly, I hope you get the parts you need.

Secondly, I know that in this day & age of instant electronic communication it's considered old-fashioned, but capitalization, correct spelling, and the use of punctuation really do make a post easier to read, and respond to. Somebody had to say it.
__________________
God Bless America

--Smokey Joe
Smokey Joe is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:00 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06073 seconds with 7 queries