The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old July 9, 2011, 10:37 PM   #1
rhinonewshooter
Member
 
Join Date: June 15, 2011
Posts: 95
How many chokes do I need with a 390

I have narrowed my search for a semi auto to either a beretta 390 or 391. Right now I am thinking of focusing on a 390, but what I have seen so far have not had chokes or a Case. I can figure on getting a case. What I don't know is how many chokes I will need for skeet and trap, and perhaps a bit of hunting. Would 3 be enough.?

I am trying to do an apples to apple comparison on a few guns on gun broker to figure out my high bid.
rhinonewshooter is offline  
Old July 9, 2011, 10:56 PM   #2
publius
Senior Member
 
Join Date: January 25, 2005
Location: Mississippi/Texas
Posts: 2,457
Yes, an improved cylinder, modified, and full are all you will ever need. If you are going to turkey hunt you may decide you want one of the high dollar extra full chokes on the market but you sure don't need one.
__________________
"Suppose you were an idiot, and suppose you were a member of Congress, but I repeat myself." Mark Twain
publius is offline  
Old July 9, 2011, 10:57 PM   #3
Rob228
Senior Member
 
Join Date: May 29, 2010
Location: Broomfield CO
Posts: 582
If you start out with a full, modified and improved cylinder you should be alright for just about anything.
Rob228 is offline  
Old July 10, 2011, 08:26 AM   #4
oneounceload
Junior member
 
Join Date: April 18, 2008
Location: N. Central Florida
Posts: 8,518
IC can be a little tight, (but very doable) for Skeet, while the M will handle trap

Once you get shooting more, you may determine that a few extra chokes are necessary. If so, they are available from a variety of makers - just make sure you get the ones for YOUR model Beretta and barrel, as Beretta has several different chokes out there for different models and barrels and they are NOT interchageable
oneounceload is offline  
Old July 10, 2011, 09:08 AM   #5
Slugo
Senior Member
 
Join Date: September 15, 2001
Location: Central PA
Posts: 1,007
my simple rule of thumb for a do all 12 gauge:

- Skeet/skeet shooting
- Improved Cylinder/sporting clays
- Modified/16 yard standard trap

I find Cylinder chokes a waste and also a Full choke, except for turkey hunting and handicapped trap...
__________________
Sometimes wrong, but never in doubt...
Slugo is offline  
Old July 10, 2011, 09:15 AM   #6
jmr40
Senior Member
 
Join Date: June 15, 2008
Location: Georgia
Posts: 6,078
For skeet I use a Skeet tube. For 90% of my hunting, even waterfowl I use IC. With steel shot IC tubes shoot tighter than you would think. I occasionally go to modified if I'm getting a lot of longish shots. For turkey hunting I use an extra full designed for turkey hunting. My full choke tubes almost never get used.
jmr40 is offline  
Old July 10, 2011, 11:44 AM   #7
.300 Weatherby Mag
Senior Member
 
Join Date: September 6, 2008
Posts: 1,777
For almost all of my guns.. Including my Beretta 3901, I have Skeet, IC, Mod, and Full... Truthfully 99.99% of the shooting can be done with IC, Mod, and Full...
.300 Weatherby Mag is offline  
Old July 10, 2011, 06:55 PM   #8
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,408
Most shooting is done with open - to mid range chokes..../ so a Cyclinder, Improved Cyclinder and a Modified would be a minimum .../ most shooters rarely use an Imp Mod or a Full choke...

but getting a few more chokes is the least expensive thing you'll ever do in this pastime ...compared to shells and targets .../so don't get overly focused on chokes.
BigJimP is offline  
Old July 10, 2011, 08:46 PM   #9
zippy13
Senior Member
 
Join Date: August 23, 2008
Location: SoCal
Posts: 6,416
Three's plenty if you select them correctly: Loose, medium and tight. Actually you won't need the tight one unless you shoot handicap trap or a hunting environment requires it.

Of course, there are various degrees of each choke. My R-1100 trap model came with three screw-in, over bored chokes: full, extra full and super full. In .410-bore Skeet tubes, I have screw-in chokes who's difference is so subtle it's probably undetectable by the typical gun owner.
zippy13 is offline  
Old July 10, 2011, 08:53 PM   #10
rhinonewshooter
Member
 
Join Date: June 15, 2011
Posts: 95
Thanks for the help gents. It seems that I should be able to pick up a decent set of chokes for a 390 for under $100 - more like around $80. This helps me out a great deal.
rhinonewshooter is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08113 seconds with 7 queries