The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 28, 2011, 05:07 PM   #1
theycallmeingot
Member
 
Join Date: February 3, 2011
Posts: 54
Hogdon Clays and 9mm

I've been reloading .45ACP for a few years now. I don't know scientifically what makes one powder good for one cartridge, and bad for another. i started with "suggested" powders for .45ACP and then shopped around 1lb at a time for the cleanest until i settled on hogdon clays. i never noticed any difference in accuracy out of any of the different ones i've tried. i tend to like large particle powders like clays more than smaller ones like zip, however. it seems to meter more consistently.

i'm going to start reloading 9mm very soon. is there any reason not to use clays for this as well? it would be convenient, because i already have and use it, but if there is something much better, it's no big deal to keep two powders.

for the record, at one time i read about what makes a good a powder for certain cartridge, but i guess it didn't stick, or was over my head. is there an easy way to tell what might be good for which cartridge? any replies appreciated, along with any links to reading material on the matter.

thanks
theycallmeingot is offline  
Old June 28, 2011, 05:32 PM   #2
Nosparetime
Senior Member
 
Join Date: July 6, 2009
Location: Oregon
Posts: 100
I have used clays for 9mm and been very happy with it. Right now I am using some vhitivouri powder for 9. But when I run out I will use clays or AA#2.
Nosparetime is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06265 seconds with 9 queries