The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old June 3, 2012, 09:12 AM   #1
bbqbob51
Senior Member
 
Join Date: November 6, 2005
Posts: 735
Line or unlined leather holster for my 686+?

I'm about to pull the trigger on a new holster for my S&W 4" 686+ revolver and wonder if I should get a lined or unlined leather holster. All I have ever had was unlined but I spent more on this handgun than any other I own so I just wonder if it's worth the extra cash for the lined. What are the pros and cons? Thanks for any info in advance.
bbqbob51 is offline  
Old June 3, 2012, 10:42 AM   #2
JimPage
Senior Member
 
Join Date: February 21, 2010
Location: Rome, NY
Posts: 636
Pros: Less wear on the gun, bluing. Smoother drawing the gun.

Cons: More expensive than unlined. Wears out faster than unlined.
__________________
Jim Page

Cogito, ergo armatum sum

Last edited by JimPage; June 4, 2012 at 01:09 PM.
JimPage is offline  
Old June 3, 2012, 01:53 PM   #3
ClydeFrog
Junior member
 
Join Date: May 1, 2010
Posts: 5,798
Lined vs unlined holsters...

Most serious gun owners & armed professionals(EP agents, LE officers, security industry) prefer the unlined holsters.
I'd heard that lined styles can draw in dust, dirt, grit etc.
They may also retain moisture or hold water if you wear the firearm in bad weather(snow, rain, sleet).
I'd buy an unlined holster. If you plan to keep the .357 revolver you might want to get it treated with NP3+, Black-T or Bearcoat. It will protect the firearm & improve cleaning/service.

ClydeFrog
www.black-t.com www.Robarguns.com www.bearcoat.com
ClydeFrog is offline  
Old June 4, 2012, 08:32 AM   #4
JerryM
Senior Member
 
Join Date: April 4, 1999
Location: New Mexico
Posts: 1,884
I have both types and much prefer the unlined.

Jerry
__________________
Ecclesiastes 12:13 *┬ÂLet us hear the conclusion of the whole matter: Fear God, and keep his commandments: for this is the whole duty of man.
14 *For God shall bring every work into judgment, with every secret thing, whether it be good, or whether it be evil.
JerryM is offline  
Old June 4, 2012, 05:35 PM   #5
Kreyzhorse
Senior Member
 
Join Date: April 12, 2006
Location: NKY
Posts: 11,495
For your stainless steel 686, I don't think you'll see any advantage to spending the extra cash on a lined holster.
__________________
"He who laughs last, laughs dead." Homer Simpson
Kreyzhorse is offline  
Old June 6, 2012, 05:12 PM   #6
fairview mick
Senior Member
 
Join Date: November 3, 2005
Location: Fairview Park, Ohio
Posts: 785
Holster for 686

Hi
Take a look at the "Fobus" retention holster. I have one for my 4 inch 686 and really like it.
__________________
90% of my hard earned money went to Hot women, fast bikes and guns. THE REST I WASTED!!!!!
Mickey-NRA life member
fairview mick is offline  
Old June 6, 2012, 06:29 PM   #7
bbqbob51
Senior Member
 
Join Date: November 6, 2005
Posts: 735
Thanks for the info everyone.
bbqbob51 is offline  
Old June 7, 2012, 08:36 AM   #8
aarondhgraham
Senior Member
 
Join Date: December 1, 2009
Location: Stillwater, OKlahoma
Posts: 7,117
Lined is best.

Quote:
I'd heard that lined styles can draw in dust, dirt, grit etc.
It's actually the exact opposite.

Unlined holsters hold any particulate matter in the "fuzzy nap" of the flesh side of the leather,,,
The dirt particles act as an abrasive to a gun's finish.

Suede lined holsters are probably the worst on a guns finish,,,
It acts like the cleaning rags you buy that are impregnated with a mild abrasive.

Smooth lined holsters are the easiest on a guns finish by far,,,
There is nothing for the particulate matter to imbed into.

Aarond

.
__________________
Caje: The coward dies a thousand times, the brave only once.
Kirby: That's about all it takes, ain't it?
Combat: "A Silent Cry"
Aarond is good,,, Aarond is wise,,, Always trust Aarond! (most of the time)
aarondhgraham is offline  
Old June 7, 2012, 07:42 PM   #9
bbqbob51
Senior Member
 
Join Date: November 6, 2005
Posts: 735
Interesting take on the lined vs unlined discussion and it makes sense. As I said in my first post all my current holsters are unlined and have had no real problems so far but I don't really give them heavy use. I just wonder about long term wear.
bbqbob51 is offline  
Old June 8, 2012, 08:11 AM   #10
High Noon
Junior Member
 
Join Date: October 2, 2011
Location: Florida
Posts: 13
There is alot of misinformation on lined holsters. First off, its a manufacturing nightmare. Its a very diffcult process to get correct. Its unpredictable at times and you lose holsters to the grave yard because of it. And it drives the price of the holster up.

Many makers use suede to line with and thats a problem. Its not a good material and has gotten the reputation it deserves. We use a man made lining for the past 15 years and have had no negative problems. That link below will give you more infomation.

What ever is used to line the holster, I repeat its a manufacturing nightmare. For the customer that should not make a difference, get what you want. As long as you got a professional doing the work you will be OK.

http://www.highnoonholsters.com/_Que...g/_lining.html

Hope this helps
Justin
__________________
www.HighNoonHolsters.com
High Noon is offline  
Old June 9, 2012, 08:32 AM   #11
bbqbob51
Senior Member
 
Join Date: November 6, 2005
Posts: 735
High Noon, Before I saw your post I ordered the lined DeSantis Thumb Break Scabbard Belt Holster from Midway. They had a great clearance price on it for $50.29 (better than some unlined) and only had one left so I acted quickly. It does have the suede lining so I will see how it works and post the pros and cons.
Your Noon Holster look great and I will definitely look at them if I get another handgun in the future, I'm hoping to get myself a 686+ with a 6" barrel later. Thanks to everyone for your information.
bbqbob51 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:33 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08705 seconds with 9 queries