Custom rifle pics??

[Get R Done Guns]

Ok guys, let's see the rifles you have built or had built or just customized your stock rifle. Big, little, fancy, or plain Jane. If you have mods on them we'd like to see them. We only get to see the stock rifles usually and would like to see how YOU dress them up!

Thanks to all posters and we look forward to seeing them!

This rifle is a custom Lazzeroni 8.59 Titan.
Built off a remington 700 action.
This is a large .338 that fires 250 grain Scenars at 3250.

Stock is HS precision tactical with 30" fluted shilen barrel and a muzzle break obviously.

Damn....can't find the pic of the entire rifle??????? Will look for it.

[taylorce1]

Well I guess I'll be the first!

My builds is as follows:

Zastava action with set triggers standard bolt face, purchased from Wild Alaska.
Blue print and barrel install done by HTC rifles here in Colorado Springs.
26" Lilja #5 contour barrel chambered in .25-06 Rem.
KG Gunkote semi-gloss black finish of barreled action.
Original stock was a Richard's Microfit exhibition grade from the closeouts/seconds list. It broke in two through the recoil lug before I fired a shot.
Second stock is a take-off of a Whitworth Mauser that was given to me on another forum. I did the refinish work myself.
Recoil pad installed by Kevin Weaver of Weaver Rifles, Peyton Colorado.
Leupold standard base and low rings.
Bushnell Elite 4200 4-16X40 AO scope duplex reticle.

Just home from the gunsmith!



Restocked and ready for load development, Leupold VX-II 4-12X40AO fine duplex reticle.



Here is the rifle as she sits today. (some of the pics were taken before I installed the Leupold base and rings)









The only thing I'd do different is not to coat the extractor or bolt body. While Gunkote is tough it is rubbing off the extractor with the metal to metal contact. I should have had it jeweled instead. So far I've taken a pronghorn doe, coyote, and buck mule deer with this rifle.

[chasep255]

Why 2 triggers?

[taylorce1]

Why 2 triggers?

The rear trigger sets the front trigger to a lighter pull weight. If I don't set the trigger I have a lot of creep to take up the first stage and about a 4 lb trigger pull. Once I set the rear trigger my front trigger has no creep and about a 4-6 oz trigger pull. It just allows me a few options while hunting that normal (non set) triggers don't. Plus that was the only action WA had when I purchased it off of the forums.

[Ridge_Runner_5]

Matched pair of Wilson Combat stripped receivers
Daniel Defense 16" Midlength barrel
Young MFG chrome M16 bolt carrier group
Daniel Defense lower parts kit, and upper parts
Magpul MOE handguard
LMT Sopmod v2 adjustable stock
ERGO pistol grip
Troy rear sight
EOTech XPS 2-0

[Scorch]

Oooooh, fun!!

OK. Savage 99C in .458X2" Barnes.

Ruger 77 MkII in 6mm-06, GunKote, MPI fiberglass stock, McGowen barrel.

Peruvian Mauser 1895 in 7X57 Improved, English stalking rifle pattern.

[tobnpr]

Nothing impressive...but I did do all the work myself...

[taylorce1]

Got some more!

.35 Whelen custom I picked up off of Gunbroker. All I can tell you is that it is a 1903 action. It currently wears a 1.75-6 Leupold VX-III scope.




These are the original GB pics I saved.

[RedNeckWino]

Finished is a Mossberg 100ATR .308 win, the other is a project soon to finish Stevens/Savage .243 for a friend of mine.

[Magnum Wheel Man]

Here are just a few of them...

pair of custom Martini single shots... "safari" top rifle has 3 leaf rear sight & is chambered in a 1 in 14" twist 45-70 barrel... middle gun is a "beater" Martini & is chambered in 50-70

bottom one in this pic was built from a new Marlin 44 magnum, & is currently chambered in 50 A.E.



custom 30-06



custom 25-06 ( tiger striped stock does no photogragh well )



custom 32-40 fast twist Remington roller

http://thefiringline.com/forums/atta...8&d=1224616994

customized guide gun in 45-70



custom Navy Arms Roller in 40-65



Custom BRNO action 6.5 x 284 under construction

[emcon5]

Remington 700, 28" Stainless PacNor, 6.5-06, Leupold 30mm 6.5-20X50 LR Mil-Dot, HS Precision.

[taylorce1]

MWM I always love to see your rifles!

[Wyosmith]

OK---- I'll play
But I have too many to post here. (I am a gunsmith full time.)
So I'll post links to photobucket.

This link has 12 pages of pictures.
http://s90.photobucket.com/albums/k2...erican%20guns/

This link has 4 pages of pics. Some of these guns were not checkered or engraved when I took them.
http://s90.photobucket.com/albums/k2.../Other%20guns/

This link has 4 pages of pics too.
http://s90.photobucket.com/albums/k2...nglish%20guns/

This rifle is for sale. 11 pictures here ( not good pics, but it's a good rifle)
http://s90.photobucket.com/albums/k2...hurch%20rifle/

This link takes you to 2 pages of pictures.
http://s90.photobucket.com/albums/k2...German%20guns/

I also have 2 other rifles to sell. A left handed 58 Cal half-stock Hawken and a right handed Lancaster 50 cal longrifle.

[Delaware_Dan]

Started with a plain jane stainless Ruger 10/22.



And ended up with this:

[Mike38]

Remington 700AWR cal. 7mmSTW. Made in the Remington Custom Shop. McMillan stock. Leupold VX3 4-14x40. Just over 0.5 MOA.

[Rembrandt]

Found the semi inletted stock for this 1936 Winchester 52 Speedlock at a gun show for $50. Took nearly 20 years to collect all the vintage Al Freeland hardware and accessories. Scope is a Lyman Super Target Spot 20X. Emblem on grip cap is recessed and embedded in clear acrylic.

[Rembrandt]

Built from scratch, stock started as a blank of Pakkawood....a high density laminate used in knife handles and cleaning rods. Finished in an automotive clear poly urethane, sanded and buffed to a mirror finish. First attempt at building a gun stock.

[taylorce1]

1917 Remington .300 H&H, Richards Microfit Stock, Leupold VX-III 2.5-8X36 scope, Timney trigger, Dayton Traister speed lock kit.

Before:



After:





I think it will shoot!

[Get R Done Guns]

Nice shooter you have there. Guys the rifles are cool, keep them coming!

[stu925]

Here's my Swede:

Specs: 6.5x55mm Swede in a Fajen Black Walnut stock, Canjar set trigger, Leupold XV-II 3-9x.

Built on a Mauser 98:

Specs: .280Rem with heavy barrel in a Fajen Black Walnut stock, Canjar set trigger, 20x Lyman scope, Harris Bi-pod

Both rifles were built by local gunsmiths for my father so I don't know all the particulars like barrel manufacturers but both rifles shoot very well with the right loads.

[taylorce1]

Lets bump this up again!

Here is my little Stevens 200 I built.

Sharp Shooter Supply provided the Competition trigger, SS recoil lug, Tactical bolt handle, and metal trigger guard. Sin Arms 20" #3 contour, recessed target crown, 1:12 twist barrel chambered in 6X47 Rem. Factory stock finished in Krylon forest green.

[ghostman1960]

[Gehrhard]

Here's a pair...

.50 Cal's.

Yes, that's an old Pedersoli Slver Star custom made for me in Italy in non-existant .50 Cal. too.

[taylorce1]

Springfield 1903A3 in .338-06, 24" fluted Lilja barrel, 2.5-8X36 Leupold VX-III scope. I purchased this rifle used as well, but it was built by HTC rifles same as my .25-06 at the top.

[BIGR]

Nice rifle, but your wife aint going to like seeing it on the kitchen counter.