The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 3, 2011, 01:31 AM   #1
TennJed
Senior Member
 
Join Date: September 26, 2010
Posts: 1,512
45 Colt (LC) Brass

Where do you get your 45LC brass? just picked up a Blackhawk 45LC/45ACP and was thinking about just reloading for it instead of buying any factory.
__________________
Find out just how tall I am
By jumping in the middle of a river
TennJed is offline  
Old June 3, 2011, 01:44 AM   #2
Hamour
Member
 
Join Date: September 9, 2007
Posts: 64
Starline brass, they deliver to your door.

http://www.starlinebrass.com/index.p...acc214eea5d1d0
Hamour is offline  
Old June 3, 2011, 09:26 AM   #3
TATER
Senior Member
 
Join Date: November 19, 2002
Location: Mississippi
Posts: 886
StarLine
TATER is offline  
Old June 3, 2011, 10:34 AM   #4
Doodlebugger45
Senior Member
 
Join Date: April 15, 2009
Location: Wyoming
Posts: 1,717
Starline is the best. However, if you're needing it now, it might be hard to come by immediately. You just have to check around your local places as well as Midway or directly at Starline as mentioned above. If you can't find Starline and you need the brass now, you can use Winchester or MagTech brass. They are both pretty good. I would avoid Remington brass if possible for that cartridge.
Doodlebugger45 is offline  
Old June 3, 2011, 05:37 PM   #5
Stargazer
Senior Member
 
Join Date: August 6, 2006
Location: Republic of Texas
Posts: 506
+1 for Starline. These guys know how to make a case that lasts! I have shot literally thousands of MAX 45 LC rounds and have yet to find a crack in one of them. The cases I have have been reloaded several times and still have not failed. I found a few hundred at a gunshow and really did not have the cash to spend on them but I did anyway due to their rarity. Found some .357 ones there too, had to grab a (100) of those as well. IMO there is no better cases produced, period. TIP: Use just a twirl of lube from a case lube pad right at the mouth of the case before sizing in a carbide die, makes the cases last way, way longer and the effort to resize them is less than a 45 ACP in a carbide die with no lube.
__________________
5.56mm, reach out and touch something. .458 SOCOM,reach out and knock something down.


M70 Web Page
Stargazer is offline  
Old June 3, 2011, 06:30 PM   #6
DiscoRacing
Senior Member
 
Join Date: December 19, 2008
Location: milton, wv
Posts: 3,640
Starline for me also
__________________
Desert Eagle Alliance Group Launcher Extraordinaire ______
----Get Busy Live'n.....Or....Get Busy Die'n......Red
-------They call me Dr. Bob,,,, I have a PhD in S&W
DiscoRacing is offline  
Old June 3, 2011, 08:33 PM   #7
mmb713
Senior Member
 
Join Date: March 15, 2011
Location: Salt Lake City, UT
Posts: 286
Another Starline fan. My 45 Colt Blackhawk has never had factory ammo fired in it. Every round has been handloads in the batch of 500 cases from Starline I bought when I bought the gun. They are going on their eighth reload now and they are still going strong. I use Starline in 45 ACP and 357 Magnum too.
http://www.starlinebrass.com/
mmb713 is offline  
Old June 11, 2011, 10:24 PM   #8
Para Cassatt
Senior Member
 
Join Date: June 16, 2010
Location: South Carolina
Posts: 117
Ditto, Starline. They have the best folks I've had the pleasure of making a phone order with.
Para Cassatt is offline  
Old June 12, 2011, 08:38 AM   #9
Locoweed
Senior Member
 
Join Date: August 8, 2008
Location: Alabama
Posts: 638
And yet another vote for Starline. I use them for all my pistol cartridges whenever possible. They're the best!
Locoweed is offline  
Old June 19, 2011, 03:01 PM   #10
Peter M. Eick
Senior Member
 
Join Date: August 3, 1999
Location: Houston, Texas
Posts: 2,862
Starline delivered 1000 pieces of 45 colt brass to me just this week. In about 20 minutes I will start loading it up. It is "in stock" right now.
__________________
10mm and 357sig, the best things to come along since the 38 super!
Peter M. Eick is offline  
Old June 19, 2011, 05:17 PM   #11
TXGunNut
Senior Member
 
Join Date: January 16, 2010
Location: If you have to ask...
Posts: 2,851
Gee, so much for my little "secret". Good folks @ Buffalo Arms generally have a good supply of most varieties of Starline brass, tons of other great stuff too. www.buffaloarms.com
Oops, they're out @ the moment.
__________________
Life Member NRA, TSRA
Smokeless powder is a passing fad! -Steve Garbe
I hate rude behavior in a man. I won't tolerate it. -Woodrow F. Call Lonesome Dove
My favorite recipes start out with a handful of used wheelweights.
TXGunNut is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:48 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08623 seconds with 9 queries