The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old June 19, 2011, 07:59 PM   #1
JagerBomb
Junior Member
 
Join Date: June 19, 2011
Location: Cincinnati, OH
Posts: 9
Just bought reloading equipment

Just bought a single stage Lee from a friend. I got dies for 9mm, .39 spl, and .45acp. I will be loading 9mm and .38 for the time being. I talked to him a bit about the basics, but wanted to ask if anyone had advice for a new reloader. I hope to buy a manual tomorrow that covers the basics.
JagerBomb is offline  
Old June 19, 2011, 08:08 PM   #2
jaguarxk120
Senior Member
 
Join Date: February 28, 2008
Location: Michigan
Posts: 1,990
Get the Lyman manual one of the best you can get. Also buy The ABC's of reloading. Those two books should have enough information to get you started.
jaguarxk120 is offline  
Old June 19, 2011, 08:41 PM   #3
maggys drawers
Senior Member
 
Join Date: March 4, 2006
Posts: 176
Check your local library. Mine has The ABC's of Reloading, Hornady manuals and Modern Reloading by Lee.

This option might tide you over if you have to order and wait for delivery.
maggys drawers is offline  
Old June 20, 2011, 12:09 AM   #4
jmortimer
Junior member
 
Join Date: January 24, 2010
Location: South West Riverside County California
Posts: 2,763
For around $13.00 I think it would be insane not to get Modern Reloading by Richard Lee when you are using his equipment and then get Lyman's 49th. Midway USA stopped selling the ABCs of Reloading but when they did it had lower owner reviews/ratings than Modern Reloading and Lyman's 49th. Load data can be obtained directly from powder manufacturers web sites.
jmortimer is offline  
Old June 20, 2011, 01:57 AM   #5
BDS-THR
Senior Member
 
Join Date: June 12, 2010
Posts: 474
+1 on Lyman 49th.

I tend to rely more on current published load data from powder manufacturers but will cross reference them with Lyman 49th.


Here are some powder manufacturers' load data pdfs (I print them out and keep in a binder next to the reloading bench and also keep them on my computer desktop for ready reference use):


Hodgdon Load Data (covers Hodgdon, Winchester and IMR powders) - http://www.google.com/url?sa=t&sourc...rB7JgA&cad=rja

Alliant 2011 Load Data - http://glarp.atk.com/2011/2011_Catal...derCatalog.pdf

Alliant 2004 Load Data (has many load data not in 2011 edition) - http://www.google.com/url?sa=t&sourc...Kft_jg&cad=rja

Accurate Load Data - http://www.accuratepowder.com/wp-con...d_data_3.5.pdf

Vihtavuori 9th edition Load Data - http://www.lapua.com/upload/download...ngguideed9.pdf
BDS-THR is offline  
Old June 20, 2011, 08:08 PM   #6
JagerBomb
Junior Member
 
Join Date: June 19, 2011
Location: Cincinnati, OH
Posts: 9
Picked up Lymans 49th today, got ABCs of reloading on order at the library.
JagerBomb is offline  
Old June 20, 2011, 08:12 PM   #7
MidwestRookie
Senior Member
 
Join Date: September 4, 2010
Location: IL
Posts: 462
I just got the Lyman and Lee manuals from midway, but thanks for the heads up on the ABCs of reloading, just bought it on google ebooks so I can read it on my phone at work throughout the summer..

thanks!
MidwestRookie is offline  
Old June 20, 2011, 09:31 PM   #8
TXGunNut
Senior Member
 
Join Date: January 16, 2010
Location: If you have to ask...
Posts: 2,851
You guys are off to a great start on a fun and rewarding hobby. Those manuals and the stickies and other threads here should cover just about everything. If something's not clear or covered to your satisfaction someone here will be eager to help.
Welcome to the asylum.
__________________
Life Member NRA, TSRA
Smokeless powder is a passing fad! -Steve Garbe
I hate rude behavior in a man. I won't tolerate it. -Woodrow F. Call Lonesome Dove
My favorite recipes start out with a handful of used wheelweights.
TXGunNut is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:34 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09185 seconds with 9 queries