The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Thread Tools Search this Thread
Old June 7, 2011, 12:53 AM   #1
Join Date: April 13, 2010
Posts: 27
Powder Funnel PTX....How to Install?

I have my LNL setup but was convinced the Powderfunnel PTX was a good idea to buy. I can now add a taper crimp and powder check die or maybe fab the Dillon powder check.

How do I install the Powder Funnel PTX? It came with no directions and the site isnt the greatest either. Pictures would be great.

Psychbiker is offline  
Old June 7, 2011, 07:19 AM   #2
Senior Member
Join Date: June 16, 2009
Posts: 420
I have one too. I removed the original thing that was in there i can't recall the name at the moment. Three of them came with the press and you're supposed to change it depending on the length of the cartridge your using. Well anyway that thing. I

I took that out and put the PTX in.
It took alot of messing around but it's definatelt an advantage. I still haven't got mine quite right it expands the case so much that it hits the outside of the seating die sometimes. So I still have to mess around with it a bit.

Hope that helps.
Never argue with morons, they will lower you down to their level and beat you with experience.
micksis86 is offline  
Old June 7, 2011, 03:32 PM   #3
Senior Member
Join Date: June 30, 2008
Location: Northern Va
Posts: 501
Here's the instructions on their web site. The big thing to remember is to adjust the part in the yellow box so that the arms on the rotor are aligned horizontally after you get the amount of flare you want. Takes a little fussing to get right, but so far mine seems to work well.

gregjc9 is offline  

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:56 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2015, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2015 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent:
Contact Us
Page generated in 0.07986 seconds with 7 queries