The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old May 31, 2011, 02:07 AM   #1
makarov
Senior Member
 
Join Date: January 27, 2000
Location: Washington State
Posts: 603
Best quality .22LR suppressor

OK, I have made the decision to get a suppressor strictly for target shooting with .22LR. Not going to worry about trying to get one that will also work with .223. The one I found made by Liberty looked interesting but weighed 24 ounces. Doesn't that seem a bit heavy for use with a pistol? I am used to shooting fairly substantial guns, but 24 ounces hanging off the barrel might be too much. So, I am reposting this question specifically related to .22 suppressors. Best one? They are cheaper than the centerfire cans, so price really isn't the deciding factor. To me, this is a one time purchase so I am willing to pay a fair amount for a high quality, quiet, easily cleaned suppressor. A thread on type is fine, don't want to mess with mounting systems. Leaning towards the SWR Spectre right now. It is rated for higher calibers up to 5.7x28, which to me means it is built stronger than a .22LR only can. I won't shoot anything else through it most likely, but you never know. It is 8 ounces. and all stainless construction which is appealing.
__________________
"Where Zen ends, asskicking begins" - Hyde - That 70's Show
makarov is offline  
Old May 31, 2011, 05:11 AM   #2
ohen cepel
Senior Member
 
Join Date: November 20, 1999
Location: Where they send me
Posts: 1,013
I don't have one yet.

However, am looking real hard at the AAC Element:
http://www.advanced-armament.com/product.aspx?pid=488

Will also run with .22Mag and the .17HMR, 4.3oz. Don't think it will take the 5.7. However, since I'm not a 5.7 fan that's not an issue for me.

Tons of options out there, that is for sure!
__________________
He who dares wins.

NRA Life Benefactor Member
ohen cepel is offline  
Old May 31, 2011, 06:31 AM   #3
Simmy952
Member
 
Join Date: March 3, 2009
Posts: 26
Just ordered my Silencerco Sparrow. Have heard good things about the company and its products.
Simmy952 is offline  
Old May 31, 2011, 09:39 PM   #4
hknut
Senior Member
 
Join Date: March 2, 2005
Location: Olympia, Wa.
Posts: 534
I got the SWR Spectre. I liked that it came apart for cleaning and it is rated for 3 other rounds besides the 22lr.
__________________
"Gun control is like trying to reduce Drunk Driving by making it tougher for sober people to own cars"

Walk softly and carry a big SIG.
hknut is offline  
Old May 31, 2011, 10:44 PM   #5
kenno
Junior member
 
Join Date: November 3, 2008
Posts: 180
When I lived in OZ suppressors were an over the counter item, about $35 +15 to thread the barrel.
I had a Maxim type supressor threaded on a 10-22 that was quite with sub sonic rounds. The supressor was about 4" long and 1.5" dia. a few ounces in weight.
Cleaned up easy too.
kenno is offline  
Old June 1, 2011, 10:49 AM   #6
Poodleshooter
Senior Member
 
Join Date: August 7, 2000
Location: Floating down the James River in VA
Posts: 2,535
Best is very tough to quantify as everyone has different "wants" in a can.
I'll give my opinion.
I run a Spectre on a Buckmark and 10/22. It's a great can, and very quiet, but yeah, it's a bit heavy when I think about it. Specs say 8.5oz, but nowhere near 24oz! I never really notice it, as I already have heavy barrels on both of those guns. If you're putting it on a little Walther, then maybe a lighter can is a good idea.
Durability and weight are almost always a tradeoff in rimfire suppressors. I don't think there are many .22Mag/.17HMR/5.7 rated cans that aren't fairly heavy.

Takedown ability is huge in a .22 suppressor,IMHO. The first time I poured out about tablespoon full of crap from my Spectre, I was glad that I chose a takedown .22 can. That's also the reason you don't want to run a sealed .223 can with .22lr.

To me, a short list for "best" is probably the Spectre and the Sparrow Stainless if durability is your main concern. The Sparrow is easier to take down because of the baffle "jacket" that it uses, but if you only shoot 250 or less rounds between cleanings, you likely won't notice much difference.If weight is an issue, the Element, Prodigy and original Sparrow are good choices.
Poodleshooter is offline  
Old June 2, 2011, 01:28 AM   #7
makarov
Senior Member
 
Join Date: January 27, 2000
Location: Washington State
Posts: 603
The stainless Sparrow is looking really good right now. Like the way it comes apart for cleaning. Is it as quiet as the Spectre or KodiakTL? I would like to use it on both pistols and rifles.
__________________
"Where Zen ends, asskicking begins" - Hyde - That 70's Show
makarov is offline  
Old June 2, 2011, 10:36 AM   #8
Poodleshooter
Senior Member
 
Join Date: August 7, 2000
Location: Floating down the James River in VA
Posts: 2,535
Just as quiet on a decible meter, but how it sounds to you will differ from how it sounds to others due to frequency issues. All of the .22 suppressors you're listing are pretty close on their paper stats. Of course everyone tells you that you have to hear it yourself. That's convenient if you have hordes of Title II owning friends, but that's usually not the case for most of us.

Some online folks say the Sparrows have a hefty first round pop when clean, if that's important to you. If you shoot it wet or leave it dirty a lot, that won't be much an issue though.

The Sparrow is shorter but a tiny bit heavier than the LibertyTL.

I've not shot either of them, FWIW. I'm pretty darn happy with my Spectre. It doesn't shift POI on my 10/22 out to at least 50yds, and is quiet on both my Buckmark and my 10/22. I lube it with anti-seize grease, and have never had a problem taking it apart. I don't even use the pusher tool they give you to take it down.
Poodleshooter is offline  
Old June 2, 2011, 01:40 PM   #9
Willie Lowman
Senior Member
 
Join Date: March 5, 2009
Location: Uh-Hi-O
Posts: 2,314
Poodleshooter, where are you putting anti-seize in your Spectre? Inside the suppressor tube? Between baffles?

Mine comes apart with the baffle pusher. I don't use a vise as some claim you have to but 1000 rounds gets mine pretty funky and a little stubborn.
Willie Lowman is offline  
Old June 3, 2011, 02:24 PM   #10
Poodleshooter
Senior Member
 
Join Date: August 7, 2000
Location: Floating down the James River in VA
Posts: 2,535
I put grey Permatex on the internal threads, both endcap threads on the tube,and even a thin brushing on the outside edges of the baffle stack (the edges that contact the tube. I don't put any on the surface of the baffles, but it gets there eventually anyway.
I think it also serves as a bit of an ablative medium and reduces my FRP somewhat, but that's just a guess.
The downside is that I get grey graphite mess on the outside of the can, and cleanup is always messy. However it always takes down easy and never locks up.
Poodleshooter is offline  
Old June 3, 2011, 07:20 PM   #11
Ltriker
Member
 
Join Date: June 1, 2011
Location: Texas
Posts: 31
I have three TAC 65s and a Silenco Sparrow. Very happy with the quality, quietness, and pricing.

All of them get regular use and sometimes abuse.


I would recommend either of these for anyone shopping for a rimfire suppressor.
Ltriker is offline  
Old June 4, 2011, 10:31 AM   #12
fireman1291
Junior member
 
Join Date: December 12, 2005
Location: Land O' Lakes, FL
Posts: 99
I have a silencerco sparrow, awc archangel ti, and Thompson Machine WASP. The sparrow is sweet. I'm keeping my eye on the new surefire 22 silencer and some parties in the know are reporting 113db ratings and no 1st round pop.....on a pistol.

I'd checkout the silencer forums before you decide.

Www.silencerforum.com
Www.silencertalk.com
Www.nfatalk.org

Take it easy.
fireman1291 is offline  
Old June 4, 2011, 03:28 PM   #13
Crosshair
Senior Member
 
Join Date: December 16, 2004
Location: Grand Forks, ND
Posts: 5,320
My boss is getting into suppressors and I recommended to him the Silencerco Sparrow. Multi-caliber rated, good performance, and stupid easy maintenance. The extra weight is simply not a significant issue.
__________________
I don't carry a gun to go looking for trouble, I carry a gun in case trouble finds me.
Crosshair is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:24 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08609 seconds with 7 queries