The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old June 25, 1999, 02:00 PM   #1
Kodiac
Senior Member
 
Join Date: August 16, 1999
Posts: 1,173
I am wanting to get one...

Are these little single poppers still around or are they serious collector items now demanding big bucks for the $1.25 gun?

------------------
RAGE AGAINST THE MACHINE

Kodiac is offline  
Old June 25, 1999, 03:15 PM   #2
othermarc
Senior Member
 
Join Date: April 5, 1999
Location: Stamford, CT, USA
Posts: 248
Kodiac,
Ever read "The Boof of the .45"? I can't make any qoutes right now as Idon't have it with me, but I seem to recall the author saying he has never seen one in his life. From the design described and pictured there, I bet a gunsmith could make one.
Boy, they look unpleasant to shoot!

------------------
I need more money to buy more guns and ammo.
http://www.angelfire.com/ny2/beefclub


othermarc is offline  
Old June 25, 1999, 03:45 PM   #3
Coinneach
Staff Alumnus
 
Join Date: February 23, 1999
Location: Denver, CO
Posts: 4,273
Othermarc,

They probably *were* unpleasant to shoot, but they were intended to be used by several people once or twice each. I'm pretty sure the Maquis didn't mind the terrible ergonomics, compared to getting the chance to cap a member of the occupying army.

Yes, I'm trying to avoid the K and N words.

------------------
"We are going to fight. We are going to be hurt.
But in the end, we will stand."
--Roland Deschain


Coinneach is offline  
Old June 25, 1999, 03:58 PM   #4
4V50 Gary
Staff
 
Join Date: November 2, 1998
Location: Colorado
Posts: 16,614
Saw one at a gun show a few years ago. The asking price was $400.

------------------
Vigilantibus et non dormientibus jura subveniunt


4V50 Gary is offline  
Old June 25, 1999, 04:58 PM   #5
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,161
The little FP-45 (Flare Pistol was the cover name) is interesting. The book is "The FP-45 Liberator Pistol" by R.W. Koch, but I think it is out of print.

The gun is a single shot, made from stampings, castings and welds. The barrel is rolled sheet metal. There is space in the butt for 10 rounds of .45 ACP; not a magazine, just some ammo.

I have fired mine and it is accurate enough to hit a can at 7 yards. Smooth bore, of course, but not considered a "smooth bore pistol" by BATF, so no extra legal complications.

There seem to be few records of disposition or any indication what happened to most of them. One veteran told me of kicking thousands of the boxes out of a C-47 over France, but other authorities say they never went to France and French ex-maquis say they never saw them. Not necessarily contradictory, but you would think someone would find one or two (or get hit on the head) if they were just dropped.

Other sources claim they went to the Philippines, but same story there - they never saw them.

So... Destroyed? Dumped in the ocean? Who really knows? But they are scarce in this country, especially if with the brown waxed box, the wooden stick (extractor) and the instruction sheet. All, unfortunately, have been repro'd.

Anyway, if they were used, neither our allies nor our former enemies seem to have known about it.

Yes, I think the pistol is worth $400, maybe $500 if the complete kit.

As to making one, it would not be easy to make it the way GM did, since heavy duty sheet metal rolling and stamping machines and spot welders are not lying about in the average gun shop. To make something like it would be easy.

Jim
James K is offline  
Old June 26, 1999, 08:33 AM   #6
Kodiac
Senior Member
 
Join Date: August 16, 1999
Posts: 1,173
I wouldn't want a fabricated one...
The point of owning one would be the ironic symbology there.
Not meaning to sound like a radical nut - but looking at the entended purpose of the pistol, and looking at the decline of the US internallly... Some times out own Police seem like an occupying force...
Ever have to drive through a Police roadblock? Oh yeah... Road blocks are in the Constitution... YEAH RIGHT!

Anyways - this isnt about that - this is about a slick little pistol with a ton of interesting history.

Any history on one actually having been used in war?

Oh, Harley... Thanks for that Liberator page - very cool...
------------------
RAGE AGAINST THE MACHINE



[This message has been edited by Kodiac (edited June 26, 1999).]
Kodiac is offline  
Old June 26, 1999, 08:50 PM   #7
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,161
Well, Kodiak, you may not be a "nut" but you sure are radical in calling the Liberator a "slick little pistol." Wait until you see one.

Jim
James K is offline  
Old June 26, 1999, 09:05 PM   #8
Harley Nolden
Staff In Memoriam
 
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
JIM:
I cleaned one about 20 years ago and really oiled it goood. Sure was a slick little gun.

HJN
Harley Nolden is offline  
Old June 27, 1999, 01:38 PM   #9
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,161
Harley,

Maybe we could hype this up. Imagine people throwing away their Glocks and buying Liberator pistols. They could argue about which bullets work best in that type of rifling.

Jim
James K is offline  
Old June 27, 1999, 06:46 PM   #10
Jim V
Senior Member
 
Join Date: January 31, 1999
Location: SE Michigan - USA
Posts: 4,038
I have a Flare Projector, second version. Mine showed signs of use when I got it. If they did not have some use somewhere there would be more of the boxed ones left. Most of the ones I have seen have been shot and were missing the "floor plate" that held the spare ammo in the grip.

Fun to shoot, on a limited basis. Think of the age of the pistols and the way they were made.

------------------
Ne Conjuge Nobiscum
"If there be treachery, let there be jehad!"

Jim V is offline  
Old June 27, 1999, 09:00 PM   #11
Paul B.
Senior Member
 
Join Date: March 28, 1999
Location: Tucson, AZ
Posts: 2,598
Author Bob Shimek did a report on the "Liberator" in either GUNS AND AMMO or HANDGUNS magazine. I think he said most of them were never delivered, and were destroyed at the end of the war. I'm not sure about that last part, but knowing our government, it could be true. He said it was very uncomfortable to shoot, and he only fired a few shots as he was afraid it would blow up in his hand. That's all I remember.
Paul B.
Paul B. is offline  
Old June 28, 1999, 01:21 PM   #12
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,161
Smart fellow, Bob Shimek. They sure weren't made to stand up to a lot of shooting; that ten rounds was probably the pistol's life expectancy. I said I fired mine, not that I make a habit of it. Nasty, noisy with the short barrel, and of course not at all up to any serious standard of accuracy. Not exactly what one would want for the service pistol matches.

Jim
James K is offline  
Old June 29, 1999, 12:07 AM   #13
Jim V
Senior Member
 
Join Date: January 31, 1999
Location: SE Michigan - USA
Posts: 4,038
Jim, I did not mind shooting mine, I agree that rapid fire stages would bemost difficult in any match.

BTW, I got mine out of the safe and looked at the barrel. My pistol has a barrel made from seamless tubing. The chamber was lathe turned. Most likely on a screw machine or turret lathe. Face off end, bore chamber and cut to length.

If several people had access to a mid sized machine shop with at least one punch press those little hummers could be in production right quick.

------------------
Ne Conjuge Nobiscum
"If there be treachery, let there be jehad!"

Jim V is offline  
Old June 29, 1999, 10:26 AM   #14
BigG
Senior Member
 
Join Date: May 19, 1999
Location: Atlanta, GA
Posts: 4,302
I seem to remember (from Small Arms of the World, or somewhere) the pistol was meant to cap some enemy troop, obtain a better weapon thereby, and either discard or, give the Liberator to another guerilla to replicate the process. So basically a disposable .45. Also, it was issued with a little single sheet cartoon of operating instructions.

------------------
Yankee Doodle




[This message has been edited by BigG (edited June 29, 1999).]
BigG is offline  
Old June 29, 1999, 01:32 PM   #15
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,161
Good afternoon, BigG,

That was the idea. It's just that no one seems to be able to show that it ever happened that way.

Jim

James K is offline  
Old June 29, 1999, 02:49 PM   #16
Harley Nolden
Staff In Memoriam
 
Join Date: January 8, 1999
Location: Brunswick,GA USA
Posts: 1,884
I don't guess the Germans would care to discuss it. Those that had and dealing with it are gone.

Danke

HJN

[This message has been edited by Harley Nolden (edited June 29, 1999).]
Harley Nolden is offline  
Old June 29, 1999, 03:11 PM   #17
BigG
Senior Member
 
Join Date: May 19, 1999
Location: Atlanta, GA
Posts: 4,302
Hey Jim K! Good to see you in this neighborhood. I'm beginning to like TFL. Kudos to the folks who put it together.
BigG is offline  
Old June 30, 1999, 12:52 PM   #18
Kodiac
Senior Member
 
Join Date: August 16, 1999
Posts: 1,173


I know it is a crappy gun...

But I still want one for my collection...

Any one know where one MIGHT be located?

------------------
Every man Dies.
Not Every Man Truely Lives...


FREEDOM!

RAGE AGAINST THE MACHINE


Kodiac is offline  
Old June 30, 1999, 04:17 PM   #19
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,161
Finding a Liberator is just like finding any scarce collector's item. Check ads in trade papers, go to gun shows, ask around at gun shops. Put out the word that you are interested, and maybe even place an ad in SGN or Gun List.

My experience has been that stuff I want comes in batches. I will look around for something for years, then find a bunch of them all at once. Keep some money handy; if you want it bad enough...

Jim
James K is offline  
Old July 1, 1999, 09:56 AM   #20
shadow45
Junior Member
 
Join Date: June 28, 1999
Posts: 1
Just bid on one at a local auction. The winning bid was 450 I think,(not mine). It was an interesting piece but I had already spent too much on a Sharps pepperbox. Anyway, I know of a man who at one time had one I will see if he still does and if he'll sell.
shadow45 is offline  
Old July 1, 1999, 12:10 PM   #21
James K
Staff
 
Join Date: March 17, 1999
Posts: 19,161
Kodiac,

Please don't take me wrong. I was kidding about the Liberator as a shooter. It is a great collector's item. Even though there were many made, it is is scarce; that is part of the mystery.

Many collector guns were "crappy" as guns. Witness: Colt Paterson, Volcanic, Henry, Gyro-Jet, Dardick, Collier, etc.

They all were "bad" guns, unreliable, fragile, underpowered, inaccurate, and so on, and are scarce because they didn't sell worth a darn. But who wouldn't like to have any of them in the collection today.

I see someone may know of one for sale. What'd I tell you?

Jim
James K is offline  
Old July 1, 1999, 03:56 PM   #22
Kodiac
Senior Member
 
Join Date: August 16, 1999
Posts: 1,173

The Gyro-Jet...

Oh Heck Yeah! I would LOVE to get one of those!

------------------
Every man Dies.
Not Every Man Truely Lives...


FREEDOM!

RAGE AGAINST THE MACHINE


Kodiac is offline  
Old July 1, 1999, 06:44 PM   #23
Jim V
Senior Member
 
Join Date: January 31, 1999
Location: SE Michigan - USA
Posts: 4,038
For what is worth, I have a friend that has two that were NIB when he bought them. One he opened and the other he had x-rayed or something to make sure it contained what he was buying. I am sure that he does not want to sell either. LOL

------------------
Ne Conjuge Nobiscum
"If there be treachery, let there be jehad!"

Jim V is offline  
Old January 11, 2007, 04:11 PM   #24
kratondave
Junior Member
 
Join Date: January 5, 2007
Posts: 1
liberator for sale

Hello, I have one in the box with the instructions and all ten rounds of original ammo with the wooden dowel for case extaction, i would consider all serious offers! REGARDS, kratondave@wirefire.com
kratondave is offline  
Old February 3, 2007, 12:31 PM   #25
Jbar4Ranch
Senior Member
 
Join Date: May 19, 1999
Location: Near Helena, Montana
Posts: 1,539
Quote:
Originally Posted by Jim V
For what is worth, I have a friend that has two that were NIB when he bought them. One he opened and the other he had x-rayed or something to make sure it contained what he was buying. I am sure that he does not want to sell either. LOL
According to Koch and Haugen, there is only one single example of an unopened Liberator in existence. If this is a second one (rather than the one mentioned in the books), its value is CONSIDERABLE. (Easily well into the five figure range)

Quote:
Originally Posted by Jim Keenan
They sure weren't made to stand up to a lot of shooting; that ten rounds was probably the pistol's life expectancy.
According to the books by Haugen and Koch, samples were regularly taken off the assembly line, and test fired 50 times with standard .45acp ball. These samples were essentially unusable at the end of the tests. For its intended use, a few of the ten rounds may have been fired to find the point of impact at ten feet or so, then a final single round when it counted.

SHOOTING THE LIBERATOR
__________________
Sometimes the squeaky wheel gets replaced...

SASS 47015
Jbar4Ranch is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:49 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.12037 seconds with 8 queries