The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old May 12, 2011, 10:01 AM   #1
Sigbill
Junior Member
 
Join Date: October 18, 2010
Location: New Hampshire
Posts: 7
Mossberg 500 Question, Advice Please...

I have a Mossberg 500 12-guage shotgun, chambered for 2-3/4, and 3" shells. I had a 'brain-cramp' , and inadvertently purchased a box of shells (#2-shot) that are 3-1/2"... Here is My Question. I can Individually load them, and they seem to "Fit" in the Chamber. Would I be able to use-them-up this way ???
Thanks in advance for Your Input...
Sigbill is offline  
Old May 12, 2011, 10:27 AM   #2
oregunner
Senior Member
 
Join Date: May 12, 2011
Location: Oregon, of course
Posts: 136
No, It won't work! The chamber must be long enough for the shell to be able to open the crimp when fired. A 3 1/2 inch shell will fit in a 3 inch chamber but there won't be room for the crimp to fully open when the shell is fired. Find someone that would trade you for something that works in your gun, and chalk it up to your shotgun education.
oregunner is offline  
Old May 12, 2011, 10:36 AM   #3
Dave McC
Staff In Memoriam
 
Join Date: October 13, 1999
Location: Columbia, Md, USA
Posts: 8,812
NOT a good idea. Trade them off or return them to where you bought them.
Dave McC is offline  
Old May 12, 2011, 10:51 AM   #4
BigJimP
Senior Member
 
Join Date: February 23, 2005
Posts: 11,420
No, they are dangerous to shoot in your gun ..../ and maybe disastrous !!

The measurement on the box - is the fired length ( so that's why you think they fit into your gun ). Please do not fire those shells in a 3" chambered gun ...
BigJimP is offline  
Old May 12, 2011, 11:36 AM   #5
hogdogs
Staff In Memoriam
 
Join Date: October 31, 2007
Location: Western Florida panhandle
Posts: 11,069
Massively excessive chamber pressure will be present.. both from the longer shell with heavier payload of shot as well possible higher grain/dram weight of powder along with smaller opening of shell due to smaller chamber/forcing cone.

Brent
hogdogs is offline  
Old May 22, 2011, 11:50 AM   #6
Gehrhard
Junior member
 
Join Date: July 15, 2009
Location: East of the Missississippippi
Posts: 675
All The Above -- Do NOT Shoot These!

Bring 'em back for a credit and get something else -- not the store's fault. Sell em' to a table at a gunshow for half price at the start of some hunting season. Donate them to a gunclub/NRA Dinner to raffle off/give away as a prize and mention your name...
Gehr
Gehrhard is offline  
Old May 22, 2011, 01:27 PM   #7
zippy13
Senior Member
 
Join Date: August 23, 2008
Location: SoCal
Posts: 6,416
Sigbill,
The process you described works when using 3 inch shells in a barrel marked for 3 inch shells installed an action originally designed for 2 3/4-inch shells. This situation is quite common since some manufacturers no longer make 2 3/4-inch replacement barrels for the shorter actions. The shell is being used in an appropriate chamber, but may not cycle in the short action.

With 3 1/2-inch shells in a 3-inch chamber it's a totally different story, you have two problems: First, the 3-inch chamber is too short to safely use a 3 1/2-inch shell. And, then there's the problem of over pressure. For 2 3/4 and 3-inch shells the SAAMI maximum average pressure (MAP) is 11.5-KSI. For the 3 1/2-inch guns the MAP has been increased more than 20%, to 14.0-KSI.

Be safe!
zippy13 is offline  
Old May 22, 2011, 05:23 PM   #8
the rifleer
Senior Member
 
Join Date: March 5, 2008
Location: Sunny California
Posts: 1,260
Just find someone at the range with a 3 1/2'' gun and trade them a box
__________________
There is no such thing as a stupid question, only stupid people.
the rifleer is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07931 seconds with 9 queries