The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > The Dave McCracken Memorial Shotgun Forum

Reply
 
Thread Tools
Old April 16, 2011, 09:05 PM   #1
new_camper
Senior Member
 
Join Date: April 16, 2011
Posts: 119
Mossberg 185D

Hi everybody, I have read a lot on this forum and have decided to join up hoping that you all could help me with a few questions. I have a mossberg 185d that has been sitting for years, and I would like to get it out and start using it a little. I was going to disassemble it and inspect it thoroughly, and was wondering if these shotguns have any trouble prone parts to look out for, to make it safe to use. Also are these shotguns able to shoot modern shells and slugs? Thanks in advance
new_camper is offline  
Old April 16, 2011, 09:44 PM   #2
TxGun
Senior Member
 
Join Date: April 14, 2008
Location: Texas Hill Country ranch
Posts: 437
The Mossberg bolt actions are generally good, rugged shotguns, IME. The 185D 20 gauge will accept modern 2 3/4" shells only (not the 3" 20 gauge shells), but that shouldn't be any problem. Unless the gun has been abused and developed some sort of problem, it should be fine. Unless you really know your way around the gun, I would disassemble it only far enough to give it a thorough cleaning. Parts for those are beginning to get scarce.
TxGun is offline  
Old April 16, 2011, 09:49 PM   #3
Scout
Senior Member
 
Join Date: August 9, 2009
Location: Central Florida
Posts: 467
I have had the 385 KB for 30 years. It has had only one problem and that is the magazine follower spring failed. I replaced the whole magazine and I'm back in business. It's a good gun, now in the hands of my fourteen year old son.
__________________
God bless the U.S. Cavalry
Scout is offline  
Old April 16, 2011, 10:11 PM   #4
new_camper
Senior Member
 
Join Date: April 16, 2011
Posts: 119
@TxGun
I was going to take the bolt out to clean the shotgun and have read that they sometimes come apart, how can that be avoided?

Last edited by new_camper; April 16, 2011 at 10:30 PM.
new_camper is offline  
Old April 17, 2011, 02:22 AM   #5
TxGun
Senior Member
 
Join Date: April 14, 2008
Location: Texas Hill Country ranch
Posts: 437
Not sure what you mean by "coming apart". I haven't had a bolt action Mossberg for years, but I never had that problem when I did. Now, I wouldn't advise trying to take the bolt itself apart unless there is some problem that requires it. Just field strip the gun...I doubt if there is a need to detail strip it. A field strip and good cleaning is likely all that is necessary on a bolt action shotgun. If the bolt seems tricky to remove to you, just clean it in-place with solvent and Q-tips. Or, take the metal out of the wood and blast out everything with Gun Scrubber, then re-lube. If the bolt does come free easily, you can throw it in a can of kerosene and let it soak...then re-oil as needed. Take your time. Think about what you're about to do. Use gun screwdrivers if you go at any screws. You'll be good to go. It's a good, solid little shotgun that will last forever if you take care of it.

Last edited by TxGun; April 17, 2011 at 02:51 AM.
TxGun is offline  
Old April 17, 2011, 12:01 PM   #6
new_camper
Senior Member
 
Join Date: April 16, 2011
Posts: 119
Thanks for the help
new_camper is offline  
Old April 17, 2011, 12:50 PM   #7
hogdogs
Staff In Memoriam
 
Join Date: October 31, 2007
Location: Western Florida panhandle
Posts: 11,071
It is a 2 piece bolt iirc. But don't sweat it... Just pull it back to stop and pull trigger to release it... Spray it down with solvent and re-oil lightly.

They are a good utilitarian gun and short of severe abuse, they are tuff as heck.

Brent
hogdogs is offline  
Old April 17, 2011, 12:55 PM   #8
schutzen
Member
 
Join Date: January 5, 2006
Location: Far Western Kentucky
Posts: 77
Mossberg Parts

I would advise you to purchase an extra magazine before they become unavailable. One good source is Havlin Sales in Missiouri. They specilize ion Mossberg parts.
schutzen is offline  
Old April 17, 2011, 02:37 PM   #9
new_camper
Senior Member
 
Join Date: April 16, 2011
Posts: 119
I also have a quick question about chokes, should I just get the other screw on chokes that are missing, or get an adjustable one like on later models? And what choke for slugs?

Sorry for all of the questions, I guess all of you have figured out that this is going to be my first shotgun (but not first firearm)
new_camper is offline  
Old April 18, 2011, 06:03 AM   #10
BANG
Member
 
Join Date: March 13, 2010
Location: PA
Posts: 69
New Camper,

I have a Model 190 which is essentially the same gun but in 16 ga. with the adjustable "C-Lect-Choke" versus the individual chokes of the 185. The bolt can be disassembled easly, but it does not "fall" appart except that the front half will come off with one-half turn. I wouldn't remove the nut securing the firing pin spring because it sets the pressuer of the firing pin.

Personally, I would prefer having the individual chokes only because my C-Lect-Choke does not pattern well. Even though I don't use this gun very often, the only problem I have had is that red safety button by the safety lever went and got lost. I purchased an extra magazine (aftermarket), but it never fit well, even with some fine tuning. I have the original magazine which fits nicely. For slugs, use an open choke--hopefully more open than modified.

Last edited by BANG; April 18, 2011 at 08:56 AM.
BANG is offline  
Old April 18, 2011, 10:29 AM   #11
new_camper
Senior Member
 
Join Date: April 16, 2011
Posts: 119
Thanks for the info. Now I can't wait to get to the range
new_camper is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08243 seconds with 7 queries