The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old July 22, 2012, 09:13 PM   #1
Jtulipana
Junior Member
 
Join Date: July 22, 2012
Posts: 1
Ar in .243

Im looking for a semiautomatic .243 on the ar platform but I have no clue where to look. Not really wanted to spending a bunch of money but just wondering where I can find one or where I could get the parts to build one would be even better. Can an ar 243 upper be put on a ar15 lower with little to no gun smithing? I would love to build a ar .243 to save money.
Jtulipana is offline  
Old July 22, 2012, 09:55 PM   #2
Creeper
Senior Member
 
Join Date: September 9, 2008
Location: Woooooshington
Posts: 1,797
A .243 AR has to be built on a .308 or "AR-10" chassis, mostly because of the cartridge OAL... Lots of makers, but none real cheap.
You can build short 6mms on an AR15 lower however... in fact, one is called 6mmAR.

Cheers,
C
__________________
Shoulder Drive Nicholson Club
Creeper is offline  
Old July 25, 2012, 06:08 PM   #3
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 2,963
You can chamber an AR-15 in the .243 WSSM....
I'm sure barrel life is a bitch, though...
But, it'll push a 100 grain bullet over 3100 fps...
tobnpr is offline  
Old July 26, 2012, 06:04 AM   #4
impalacustom
Senior Member
 
Join Date: January 26, 2009
Posts: 469
Give Dtech a call or Robert Whitley. They both make superb uppers for 6mm and 243WSSM.
The WSSM doesn't eat the throat out as bad as everyone thinks either, just keep to heavy bullets and don't run them at top speed.

Neither one of these options are cheap though, not sure what you are wanting to spend.
impalacustom is offline  
Old February 10, 2013, 10:22 PM   #5
toby3536
Junior Member
 
Join Date: February 8, 2013
Posts: 2
AR 10 .243 Winchester

I just purchased an AR 10 in .243 Winchester. Just won it on auction today so no experience shooting it yet. Very limited manufacturers Armalite and DPMS, I bought an Armalite. I have a couple of bolt action .243s and all of the reloading equipment and components so it seemed to make sense to get that caliber. I have an AR 15 in .223 but wanted a black rifle with more stopping power. I heard better reviews on the Armalite although they and DPMS are back ordered. I have been looking for a while and found this one and only on gunbroker.com yesterday and won the auction. I think it's going to be a lot of fun to shoot! I'll let you know how it goes.
toby3536 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:06 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07543 seconds with 9 queries