The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old April 5, 2011, 05:30 PM   #1
savage1r
Senior Member
 
Join Date: March 17, 2009
Posts: 313
High velocity powder for .308 and 7.62x39?

Hey guys, thought I'd rack the great minds of /reloading and see what the consensus is. I'm starting to reload (with my own setup, have reloaded before with my father's) and I'm wondering what powder gives the best velocities for .308 and 7.62x39. I ask because I like to keep things as consolidated as possible, I'd rather have 1 rifle powder and 1 pistol powder that I go to primarily (I have a .308, an sks, mosin and a sub2000 that I will be reloading for). My father always swore by 4895, but I've seen alot of good stuff about H335. What's the consensus?
savage1r is offline  
Old April 5, 2011, 06:44 PM   #2
Doodlebugger45
Senior Member
 
Join Date: April 15, 2009
Location: Wyoming
Posts: 1,717
It kind of depends on the bullet weight you are using, but the most popular powders by far for the .308 are Varget and RL-15.
Doodlebugger45 is offline  
Old April 5, 2011, 07:30 PM   #3
geetarman
Senior Member
 
Join Date: November 18, 2009
Location: Arizona
Posts: 2,746
My favorite powder for .308 is BLC(2). 43.6 grains for 168 and 175 gr. bullets works just great.

Another good one is H380. This powder also works magic in the 22-250.

I have used 4895,4064, Varget with just so-so results.

Geetarman
geetarman is offline  
Old April 5, 2011, 08:16 PM   #4
kraigwy
Senior Member
 
Join Date: June 16, 2008
Location: Wyoming
Posts: 9,443
I think you'll find out that in the 308 velocity doesn't mean accuracy. Best luck I've had with the 308 is with 4895 then again I don't load for velocity.

Can't tell you about the 7.62X39 as I have had much experience with it.

I wouldn't think the two would use the same powder effectively.
__________________
Kraig Stuart
CPT USAR Ret
USAMU Sniper School Oct '78
Distinguished Rifle Badge 1071
kraigwy is offline  
Old April 5, 2011, 09:02 PM   #5
res45
Senior Member
 
Join Date: September 15, 2007
Posts: 558
For 7.62 x 39 123 gr. .310 dia. bullet in FMJ,SP or V-MAX Your three best powder choices are AA-1680,IMR or H4198 and Reloader #7.

Max charge weights run from 24.6 to 26.8 Lyman #49 manual with a MV range of 2307 to 2412 fps. for these three powders and none are compressed. I generally find Max loads are not always the most accurate.

I don't have a 308 but I shoot a 300 Sav. and I like Reloader #15 in it and I also use load it in my 54r Russian.
res45 is offline  
Old April 6, 2011, 02:33 AM   #6
FrankenMauser
Senior Member
 
Join Date: August 25, 2008
Location: 1B ID
Posts: 6,794
Quote:
It kind of depends on the bullet weight you are using, but the most popular powders by far for the .308 are Varget and RL-15.
I think it really depends on the area you're in, and people you associate with.
My experience would say H380, 4198, BL-C(2), and H335 are more popular for .308 Win.


You are correct, though. There's no point in recommending powders, until we know bullet weights and barrel lengths (at a minimum).
__________________
"Such is the strange way that man works -- first he virtually destroys a species and then does everything in his power to restore it."
FrankenMauser is offline  
Old April 6, 2011, 12:56 PM   #7
tobnpr
Senior Member
 
Join Date: August 1, 2010
Location: Tampa Bay
Posts: 2,962
Ditto on the "velocity doesn't mean accuracy" comment above.

Granted, velocity is an important variable especially for long range guys- where minimizing time to the target reduces the effects of wind and gravity...

But I've found that max. load (or close to it) is often not the best load for maximum accuracy, and decreases the "life" of everything from the barrel to the brass...

Varget is our powder of choice for the .223, .308, and 7.62 x 54R that I handload. As an extruded stick powder, doesn't meter well, though...
H335 is supposed to be the "go to" powder for the .223 (I believe it is the formulation for the NATO 5.56 round), but we've found it less accurate in our rifles than Varget.

Every rifle, likes something different...
tobnpr is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06676 seconds with 7 queries