The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 24, 2011, 09:18 AM   #1
Buckfever4life
Member
 
Join Date: June 29, 2009
Posts: 24
Pistol finish question

I am thinking about having a custom 1911 built. I was wanting to have the slide finished in black and the frame in OD Green. My question is that if they finish the entire gun in black parkerize, can I have the frame duracoated over that? I thought I heard that the Parkerize would make a good primer for duracoat. Any/all feedback is greatly appreciated. I am wanting a finsh similar to that of a Wilson CQB with a Black Slide and OD Green Frame. Any/all suggestions greatly appreciated
Buckfever4life is offline  
Old March 24, 2011, 10:22 AM   #2
gearhounds
Senior Member
 
Join Date: February 20, 2011
Location: M'burg WV
Posts: 325
If the 2 tone green/black is what you are after, I'd look into Birdsong and associates Black-T/Green-T instead. It is teflon/polymer based, extremely durable, and vastly increases the lubricity of the weapon. From experience, I can say the claim is valid. My duty P220 (all black-T) is proof. Walter, Sr. has recently passed away, and is missed. A bit more expensive, but well worth the investment. Here's the link:

http://www.black-t.com/index.htm
__________________
Busting thugs since 1992
gearhounds is offline  
Old March 24, 2011, 10:57 AM   #3
Buckfever4life
Member
 
Join Date: June 29, 2009
Posts: 24
Thanks for the link, I will check them out now.
Buckfever4life is offline  
Old March 25, 2011, 02:24 PM   #4
lonstar45
Member
 
Join Date: March 15, 2011
Location: Texas
Posts: 17
Yes, you can duracoat right over the black parkerize and get that cool OD Green look. Here are some pics of my 10mm build in combat green using duracoat.
Attached Images
File Type: jpg 10mm 002.jpg (183.9 KB, 30 views)
File Type: jpg 10mm 003.jpg (179.1 KB, 23 views)
__________________
"We're Surrounded, That Simplifies The Problem."
lonstar45 is offline  
Old March 25, 2011, 11:50 PM   #5
ClydeFrog
Junior member
 
Join Date: May 1, 2010
Posts: 5,798
Pistol coatings, plate work...

For great pistol coating or service work, I'd suggest these well known firms;

Robar Guns; www.RobarGuns.com Bearcoat; www.Bearcoat.com Black-T; www.Black-T.com or maybe Accurate Plating & Weaponry; www.APWCogan.com .
The NIC-Cerakote coating from APWCogan.com is cool and the site has a link to a color chart where you can mix & match slide/frame colors on a duty size Glock pistol. Black, Brown, OD green, Tan, Grey, etc.

Bearcoat is impressive and the shop says it has a "lifetime" service policy.

Robar offers a lot & does a lot of military/DoD/industry work. I'd avoid the black Rogard coating. It nicks & scuffs quickly.
The NP3+ is very practical but is a dull grey-nickel based color.
Clyde
ClydeFrog is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:21 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06510 seconds with 8 queries