The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 20, 2011, 12:58 AM   #1
handgunfan101
Senior Member
 
Join Date: March 15, 2011
Location: Glasgow Kentucky
Posts: 275
What product to use ?

After shooting i noticed that the barrel (outside do to it having a compensated barrel) gets pretty filthy. I am wondering because i use the winchester oil with break free CLP in it and it does an alright job but is there a product that is better at getting the inside and outside of my barrel spotless?

thanks in advance
handgunfan101 is offline  
Old March 20, 2011, 04:50 AM   #2
WESHOOT2
Senior Member
 
Join Date: February 20, 1999
Location: home on the range; Vermont (Caspian country)
Posts: 14,213
if I bother

Some of the foaming bore cleaners seem to give good results.

Me? I use RB17.
__________________
.
"all my ammo is mostly retired factory ammo"
WESHOOT2 is offline  
Old March 20, 2011, 06:10 AM   #3
Geezerbiker
Senior Member
 
Join Date: March 20, 2011
Location: Willamina, OR
Posts: 545
Since I'm new here I don't know, but have you ever heard of Ed's Red mix your own bore cleaner? I've not found anything better and it sounds like what you're looking for. Do a search for it and give it a try...

Tony
Geezerbiker is offline  
Old March 20, 2011, 07:12 PM   #4
armsmaster270
Senior Member
 
Join Date: November 25, 2008
Location: California
Posts: 1,943
Why not use straight break free. Put a light film on dirty area and let it stand overnight then finish cleaning the next day.
__________________
http://www.armsmaster.net-a.googlepages.com
http://s239.photobucket.com/albums/f...aster270/Guns/
Retired LE, M.P., Sr. M.P. Investigator F.B.I. Trained Rangemaster/Firearms Instructor & Armorer, Presently Forensic Document Examiner for D.H.S.
armsmaster270 is offline  
Old March 20, 2011, 07:25 PM   #5
handgunfan101
Senior Member
 
Join Date: March 15, 2011
Location: Glasgow Kentucky
Posts: 275
sounds good i will give it a try. I want to beak it down tomorrow again and give it a nice go through.
handgunfan101 is offline  
Old March 20, 2011, 09:38 PM   #6
drail
Junior member
 
Join Date: February 2, 2008
Posts: 3,150
One thing that I found that helps a lot is if possible soak the fouled area with some Breakfree CLP as soon as you finish shooting at the range and while the gun is still warm. By the time you get home it is usually softened up to where an M 16 brush will take it off. The longer that gunk sits on the metal the harder it gets. If you can't deal with it at the range you can take a hairdryer and heat it up at home and let it soak for a little while before you attack it.
drail is offline  
Old March 20, 2011, 10:44 PM   #7
ClydeFrog
Junior member
 
Join Date: May 1, 2010
Posts: 5,798
Barrel-bore cleaning, Brownells...

For general barrel/bore cleaning, I suggest buying some high quality bore cleaners like Hoppes #9 or Sweets or 7.62 or Butch's Bore Solvent.
As for Break-Free, it's ok as a CLP, but you may want to order some more high tech CLPs like Weaponshield, Eezox, Gunzilla or Mpro7's LPX.

A Bore-Snake Viper can aid your barrel-bore cleaning too.

Clyde Frog
www.Brownells.com www.Gunzilla.us www.Mpro7.com www.Natchezss.com www.Weaponshield.com
ClydeFrog is offline  
Old March 26, 2011, 08:50 PM   #8
NDSingleShot
Junior Member
 
Join Date: March 26, 2011
Posts: 3
For the bore of the gun, my favorite is Boretech. Best copper solvent I can find. For carbon and powder fouling on the rest of the gun, I like gun scrubber. Works like brake cleaner, just spray until the solvent dripping off is clear. Two things to know about gun scrubber though: it dries metal out beyond belief. You need to put some Rem oil or other preservative on afterwards, or it will rust. Doesn't matter if it's blued, parkerized, stainless, anything. Put some oil on it. Also, they make a standard version and a synthetic safe version. The standard is stronger, but it will melt some cheap plastic stocks. I don't know what you're shooting, but if it's plastic, test a small amount on a hidden part of the gun first.
NDSingleShot is offline  
Old March 27, 2011, 11:47 AM   #9
hooligan1
Senior Member
 
Join Date: July 18, 2010
Location: Independence Missouri
Posts: 3,261
G-96.
__________________
Thanks for coming!
hooligan1 is offline  
Old March 27, 2011, 12:48 PM   #10
jaguarxk120
Senior Member
 
Join Date: February 28, 2008
Location: Michigan
Posts: 1,931
Go with the Ed's Red easy to mix and use.
jaguarxk120 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:39 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07529 seconds with 7 queries