The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting

Reply
 
Thread Tools
Old March 6, 2011, 04:35 PM   #1
deepcore
Senior Member
 
Join Date: July 24, 2010
Posts: 364
.308 147 gr bullet loads

Hi

I've been looking for suggested 147 gr .308 bullet (for plinking) loads.
Keep coming up with 150 gr or 140 gr loads.
Is 150 gr loads close enough (at the starting loads).
I have IMR 4895 handy.
But will get different powder if recommended.

Thanks
deepcore is offline  
Old March 6, 2011, 04:55 PM   #2
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
Who "suggested" 147 gr? I never heard of that wt. Is it an old military bullet weight?
150 gr. is probably the most popular wt. for 30-06 and .308.
For first time reloading, just back off .1 or .2 gr. on the charge and work up your loads from there.
More better....refer to a current reloading manual. You will find numerous references for 150 gr. bullets in 30-06 and .308.
Rifleman1776 is offline  
Old March 6, 2011, 10:48 PM   #3
NESHOOTER
Senior Member
 
Join Date: October 16, 2009
Posts: 509
Deepcore, yes you can use the 150 gr tables as I have reload the same the winchester 147gr bullets and with the lighter bullet and as it goes with reloading you be ok even with the highest 150 load data since the bullet is lighter and with lighter bullets most powders you able to use more powder via their data to increase fps and at the max would only depend on accuracy..good luck did you com across a good deal on 147gr the last time I got 1000 from midway... and I can sure use somemore if the price is right.
NESHOOTER is offline  
Old March 7, 2011, 12:12 AM   #4
poline
Senior Member
 
Join Date: January 27, 2009
Location: Richmond,Va
Posts: 292
My impression was that for handgun rounds one could use a lighter bullet than what was called for but, for rifle rounds one had to use the weight called for or a heavier weight. I don't say this to fuss, but one of us is not correct or maybe not. What say the forum?
poline is offline  
Old March 7, 2011, 01:30 AM   #5
dawico
Senior Member
 
Join Date: October 18, 2009
Location: Lampasas, TX
Posts: 326
You use data for the next heavier bullet weight. If you have 147gr bullets, use the 150gr data. Period. Handgun, rifle, shotgun, it doesn't matter.
dawico is offline  
Old March 7, 2011, 02:03 AM   #6
deepcore
Senior Member
 
Join Date: July 24, 2010
Posts: 364
Been waiting for Midway to come across and sell the 147s again myself.
Buddy of mine had some he wasn't going to use so I was asking about loads.
deepcore is offline  
Old March 7, 2011, 02:43 AM   #7
bamaranger
Senior Member
 
Join Date: October 9, 2009
Location: North Alabama
Posts: 4,244
FMJBT

The gr weight is pretty standard for .30 cal full metal jacket boat tail. In fact, I think its the NATO std for 7.62x51
(.308)
I've loaded and shot a couple of thousand of them in Savage.308 scout., my std load has always been 45 gr of 4064

You won't buy cheaper bullets for general shooting.

I use same slug in '06 for the Garand
bamaranger is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07154 seconds with 7 queries