The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 1, 2011, 01:15 PM   #1
harryeye
Junior Member
 
Join Date: March 1, 2011
Posts: 3
savage 99 extractor

How does one R&R the extractor on a 99 savage?
harryeye is offline  
Old March 1, 2011, 06:41 PM   #2
Wasper
Member
 
Join Date: July 13, 2006
Posts: 56
R&R ?? Does that mean remove & replace? If that is the case simply use a pin punch to punch out the retaining pin and the extractor can be removed. If you need basic disassembly instructions you can find them here:


http://www.gunreports.com/special_re...fles167-1.html

Last edited by Wasper; March 1, 2011 at 06:54 PM.
Wasper is offline  
Old March 3, 2011, 06:20 AM   #3
harryeye
Junior Member
 
Join Date: March 1, 2011
Posts: 3
ThanksWasper... that was very helpful.
harryeye is offline  
Old March 3, 2011, 07:10 PM   #4
Wasper
Member
 
Join Date: July 13, 2006
Posts: 56
Glad to help !
Wasper is offline  
Old March 4, 2011, 07:17 AM   #5
harryeye
Junior Member
 
Join Date: March 1, 2011
Posts: 3
Now when I receive the extractor I ordered from Numrich.. I'll be able to install it.
harryeye is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:50 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06947 seconds with 7 queries