The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old March 1, 2011, 12:10 PM   #1
LongRifles, Inc.
Senior Member
 
Join Date: October 21, 2009
Location: Black Hills of S. Dakota
Posts: 195
LongRifles, Inc.'s new facility!

She's finally ready!

Floor is still curing (fresh epoxy base sealer) and the paint is barely dry, but she's getting really close now. Just some trim to hang yet and I've got to run air lines for my equipment. Oh, need to install the chitter too.

Then the exodus can begin!

In floor radiant heat is the only way to go if anyone is ever considering a new building. Sooooo much nicer than forced air.

Hoping to get jiggy by the weekend!

Enjoy!

C

__________________
LongRifles, Inc.
"More than a business,
This is a lifestyle."

www.longriflesinc.com
LongRifles, Inc. is offline  
Old March 1, 2011, 01:19 PM   #2
CowTowner
Senior Member
 
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,103
Congrats on the new digs!
__________________
NRA Chief Range Safety Officer, Home Firearm Safety and Pistol Instructor
"There are three classes of people: those who see, those who see when they are shown, those who do not see."
Leonardo da Vinci
CowTowner is offline  
Old March 1, 2011, 06:27 PM   #3
Crapulence
Senior Member
 
Join Date: November 12, 2008
Location: Manly Flower Mound Texas
Posts: 126
That's a very nice building, please keep the updates coming.
Crapulence is offline  
Old March 2, 2011, 01:01 AM   #4
hoghunting
Senior Member
 
Join Date: March 27, 2006
Posts: 1,315
Great job on the building, and looks like you're in a wonderful location. Sure beats going to work in a crowded city.
hoghunting is offline  
Old March 2, 2011, 04:13 AM   #5
oldandslow
Senior Member
 
Join Date: October 2, 2007
Posts: 552
LRI, 3/2/11

Beautiful place you have there. When you get it set up inside post a few pictures.

best wishes- oldandslow
oldandslow is offline  
Old March 2, 2011, 09:18 AM   #6
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,336
Wow, that's big for a gun shop, you plan to add some 20 mm rifles to your inventory? Congratulations on the obvious success of your operation.
__________________
F 135 - the right choice
mapsjanhere is offline  
Old March 2, 2011, 10:00 AM   #7
LongRifles, Inc.
Senior Member
 
Join Date: October 21, 2009
Location: Black Hills of S. Dakota
Posts: 195
Jan,

Thanks buddy. How's that rifle shooting these days? Still working/looking good I hope.

I'm here if you ever need anything.

C
__________________
LongRifles, Inc.
"More than a business,
This is a lifestyle."

www.longriflesinc.com
LongRifles, Inc. is offline  
Old March 2, 2011, 11:42 AM   #8
mapsjanhere
Senior Member
 
Join Date: August 6, 2009
Location: Albuquerque
Posts: 2,336
Chad, the rifle is still shooting better than the shooter, but I'm able to get in the 1/2 MOA range now consistently.
__________________
F 135 - the right choice
mapsjanhere is offline  
Old March 3, 2011, 10:16 PM   #9
Clark
Senior Member
 
Join Date: December 4, 1999
Location: WA, the ever blue state
Posts: 2,587
I have given up on keeping up with Chad


Wait, wait..
Epoxy paint on a shop floor?
It seems to me that turns into a "can't repair, can't remove" situation.
Clark is offline  
Old March 15, 2011, 03:38 PM   #10
LongRifles, Inc.
Senior Member
 
Join Date: October 21, 2009
Location: Black Hills of S. Dakota
Posts: 195
The Birth Spasm Begins

Finish work inside is finally done!

I'm MOVIN IN Germs!


I'll have pics up in a few days as soon as the mayhem settles down a bit.

I did some clutter cleaning in my photobucket acct so here's the pics that I had posted previously.

Coming along!
















Thanks for the kind words.


C.


PS

Running a special on NEW IN THE BOX Blueprinted Rem 700's right now.

Here's a link with details and purchasing information. Can't order direct from me to get the deal. It's through another vendor.

http://www.snipershide.com/forum/ubb...29#Post2429529
__________________
LongRifles, Inc.
"More than a business,
This is a lifestyle."

www.longriflesinc.com

Last edited by LongRifles, Inc.; March 15, 2011 at 03:49 PM.
LongRifles, Inc. is offline  
Old March 15, 2011, 03:50 PM   #11
LongRifles, Inc.
Senior Member
 
Join Date: October 21, 2009
Location: Black Hills of S. Dakota
Posts: 195


__________________
LongRifles, Inc.
"More than a business,
This is a lifestyle."

www.longriflesinc.com
LongRifles, Inc. is offline  
Old March 15, 2011, 04:25 PM   #12
Don H
Senior Member
 
Join Date: May 8, 2000
Location: SLC,Utah
Posts: 2,705
NICE shop!

Who is the manufacturer of the loading bench?
Don H is offline  
Old March 15, 2011, 06:06 PM   #13
CowTowner
Senior Member
 
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,103
Quote:
Who is the manufacturer of the loading bench?
I can answer that one. You get them at your local Sam's Club.

http://www.samsclub.com/sams/shop/pr...756&navAction=

I own 2 of them.
__________________
NRA Chief Range Safety Officer, Home Firearm Safety and Pistol Instructor
"There are three classes of people: those who see, those who see when they are shown, those who do not see."
Leonardo da Vinci
CowTowner is offline  
Old March 15, 2011, 06:54 PM   #14
Don H
Senior Member
 
Join Date: May 8, 2000
Location: SLC,Utah
Posts: 2,705
Thanks, CowTowner!

Are they as sturdy as they look?
Don H is offline  
Old March 16, 2011, 07:04 AM   #15
CowTowner
Senior Member
 
Join Date: October 17, 2007
Location: Cowtown of course!
Posts: 1,103
PM sent to keep from hijacking the thread any further.
__________________
NRA Chief Range Safety Officer, Home Firearm Safety and Pistol Instructor
"There are three classes of people: those who see, those who see when they are shown, those who do not see."
Leonardo da Vinci
CowTowner is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:16 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2013 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09061 seconds with 7 queries