The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Competition Shooting

Reply
 
Thread Tools
Old February 15, 2011, 06:43 PM   #1
MC707
Junior Member
 
Join Date: November 25, 2010
Location: VALLEJO, CA
Posts: 8
getting into competition

Hi I am looking into getting into competition shooting. ive been playing paintball for a long time and also airsoft. been trying to get into law enforcement and decided to get into comp shooting.

i wanted to ask you all out there what groups there are here in California close to the bay area. ( San Francisco) and which if at all are better then the other? i dont want the super customized thousand dollar guns just the stock bare bones class. if there is one.

also some extra questions:

what classes are there?
steel, Silhouette, and what?

what are the best guns to use?
glock, sig, 1911, s&w, etc.

what is the best caliber to use?

hell iono just give me whatever info you got!!!
your exp., what you use, level of comp, whatever you like i need some reading material

give me all you got.
MC707 is offline  
Old February 15, 2011, 08:56 PM   #2
Japle
Senior Member
 
Join Date: October 12, 2004
Location: Viera, Florida
Posts: 1,186
Steel: Classification depends on what gun and sight combo you’re using.
There are no classes for skill level. At least not where I shoot.
When I shoot my Open gun in the S&W Nationals next month, I’ll be up against the Army Marksmanship Unit, Team S&W, Team Glock, etc.
I’m hoping to finish in the top 40.
Get started with whatever you have. Glocks are popular, also XDs, S&Ws (9mm, .40 and .45) and 8 shot wheelguns in the revolver classes. The top shooters tend to go for STI high-cap 9mms and .38 Supers with red dot sights and similar stuff. They spend $4,000+ for their rigs.
Shooting the course with .22 pistols is fun and a good way to start.

IDPA: Lots of classes, depending on your gun and your skill level. Any normal carry gun and holster will work. You see a ton of Glocks and 1911s.

Silhouette is pretty specialized. T/C single shot pistols in various wildcat calibers used to be popular back when I was into it 30 years ago. It’s all about accuracy combined with enough power to knock over a 55 lb steel silhouette of a ram at 200 meters.
They have rimfire and airgun classes, too.

Check the various websites.
Japle is offline  
Old February 16, 2011, 02:17 AM   #3
gunrobot
Senior Member
 
Join Date: August 29, 2009
Posts: 264
wow that's a lot of questions to answer, best bet, start with this show http://powerfactorshow.com

I believe they'll answer most of your questions about competition shooting and if you have any specific ones, feel free to send them an email.

hope that helps!
gunrobot is offline  
Old February 16, 2011, 09:26 AM   #4
CLC
Senior Member
 
Join Date: January 8, 2011
Posts: 422
I live on the other side of the country but had the same question so I found and joined a club. Now that im a member I have yet to find out how to get into the competitions but it's there when I have the time. I played paintball for years btw.
CLC is offline  
Old February 18, 2011, 03:14 PM   #5
Unicron
Senior Member
 
Join Date: October 1, 1999
Location: Houston
Posts: 163
Best thing to do is to visit some of the sites and talk to the directors. they should welcome you in as an observer, then you can pick and choose which you would like to try.

as a general statement, the glock 34 (9mm) is very popular in the IDPA meets i have attended. 9mm is cheaper to shoot and beginners may find the recoil easier to manage. an up and comming handgun is the S&W M&P...worth taking a look at.
Unicron is offline  
Old February 18, 2011, 04:33 PM   #6
Rifleman1776
Senior Member
 
Join Date: April 25, 2010
Location: Arkansas
Posts: 3,309
Show up to a shoot, register, compete.
Rifleman1776 is offline  
Reply

Tags
competition , shooting drills , steel plates , target shooting

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:08 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08302 seconds with 7 queries