The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Smithy

Reply
 
Thread Tools
Old February 8, 2011, 12:12 AM   #1
MikeinMinn
Member
 
Join Date: June 5, 2009
Posts: 21
Thinking of getting into gunsmithing

I'm thinking of getting into gunsmithing as a side busines. This question is for those of you that are gunsmiths and make a living at it. I have always maintained and modified my own guns. I would like to get the knowlege to perform more advanced gunsmithing. I dont live any where near a school that offers the course, and I have a family that I really can't uproot just so I can go back to school. I have checked into the online corses offered by Ashworth, and Penn colleges. I allso have looked at the video program offered by AGI. I was just wondering if as gunsmiths you had a opinion on what gives you the best knowledge base to be a competent gunsmith. If any of you have used any of these services, what did you like or dislike about the program.
MikeinMinn is offline  
Old February 8, 2011, 12:50 AM   #2
k31
Senior Member
 
Join Date: October 26, 2010
Location: utah for the time being
Posts: 213
im in the same boat have you tried Montgomery community college in north Carolina i think the coarse is done by a guy named len fenagin and is supposed to teach great classes. i was told to check it out by Remington when i emailed them about it. he teaches 3 or four different classes that handle smithing to shooting sports management.
i hit a lay off so my school money and time is going to have to wait till next fall but it seems legit not some hokey internet scheme where they teach you but you dont even need to touch a firearm. ive seen a few adds for the other sort and dont care for the idea of a certified gunsmith that cant tell me the recoil difference in a .308 and a 30-06 had to pick wood for a new stock it you dont know about those things first hand or if you have never worked wood before
__________________
"the best shooting firearm is the firearm you shoot best" Tony Marr
k31 is offline  
Old February 8, 2011, 04:16 AM   #3
Doc Hoy
Senior Member
 
Join Date: October 24, 2008
Location: Chesapeake, VA
Posts: 4,583
Fellas,

Me too, but I am only interesting in Black Powder Revolvers. I don't like the looks of the Penn College course but I will be darned if I can tell you why. Just a feeling that I would finish it and be disappointed.
__________________
Doc

My reading of history convinces me that most bad government results from too much government. Thomas Jefferson
Doc Hoy is online now  
Old February 9, 2011, 12:48 AM   #4
Wasper
Member
 
Join Date: July 13, 2006
Posts: 56
For what it's worth, I've been a hobby gunsmith for 25 yrs. Don't waste your time with the correspondence courses. I took the Penn course and the North American School of Firearms course (no longer in business). They are garbage. I also have the AGI Professional Gunsmithing Course.

The AGI course has a lot of good information but it is poorly filmed & produced. The instructor Mr. Dunlap is very knowledgable but also very lazy (as far as the course is concerned that is). I say "lazy" because many times in the videos he tries to explain the function of a firearm but decides it would be too much trouble to take the gun or assembly apart. He gives you a lot of detailed information on how to fix various types of firearms but he rarely shows you how to actually do it. He uses a chalk board to explain certain parts relationships and uses cut-away guns when possible. His favorite teaching tool seems to be his hands !! He will attempt to explain a function by using his hands instead of taking apart the gun in question that is sitting right in front of him !! The course was filmed in analog format back in 1992. The quality is lacking and the camera operator seems to be asleep at times because he misses the close-up shots that the instructor is trying to point out !! It is really annoying. Also, the AGI course is not for complete novices. There are a lot of terms, tools and procedures mentioned that they assume you are already familiar with.

To sum it up, the mail order courses are a waste of money. The AGI course has a lot of very good design, function & repair information but it is presented in a half-hearted way in my opinion. I can best describe it this way: It's like having a gunsmith read you a very good gun repair book with video pictures. This course sells for close to $4000 and if you want to learn machining, welding and heat treatment, it will cost quite a few thousand extra on top of that $4000. Much too expensive for what you actually get and you will be far from a "certified gunsmith" after viewing 108 hours of video. If you can buy the course used on ebay for a reasonable price, go for it. In my opinion a person aspiring to be a real gunsmith should attend a certified gunsmith school and/or apprentice under an experienced gunsmith.
Wasper is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.09390 seconds with 7 queries