The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Gear and Accessories

Reply
 
Thread Tools
Old February 2, 2011, 09:50 AM   #1
Shootin Chef
Senior Member
 
Join Date: January 30, 2011
Location: Columbia, SC
Posts: 121
Cleaning kit?

So, now that I'm fairly on my way to building a decent collection of firearms I was wondering if there is a kit out there that's relatively inexpensive but will handle my needs? I fire everything from bolt action, semi, shotgun, to handgun so something all inclusive would be great.

Barrel snakes or brushes? Both? Hoppe #9 or is there something better? Copper brush or should I just buy a bunch of cheap toothbrushes?
I know yall have the knowledge and experience I don't so teach me!

Chef
Shootin Chef is offline  
Old February 2, 2011, 10:58 AM   #2
gaseousclay
Senior Member
 
Join Date: August 4, 2010
Location: Frozen Tundra
Posts: 869
I can't make any recommendations myself. all of the cleaning kits I see at the big box stores strike me as cheap. I'm pretty much going for quality over quantity, so i'm buying cleaning accessories individually, like a bore-guide, one-piece cleaning rod, solvent, oil, jag kit, patches, etc. i'm sure the kits sold at stores offer good value for the money, but they're no good to you if they're cheaply made and fall apart.
gaseousclay is offline  
Old February 2, 2011, 11:41 AM   #3
jmortimer
Junior member
 
Join Date: January 24, 2010
Location: South West Riverside County California
Posts: 2,763
I have the Otis kit and like it and it will clean anything and everything - $40.00 or less for universal kit. I am adding Bore Snakes and this http://www.patchworm.com/patchworm.html
jmortimer is offline  
Old February 2, 2011, 03:00 PM   #4
Doyle
Senior Member
 
Join Date: June 20, 2007
Location: Starkville, MS
Posts: 4,968
I'm more a fan of the put-it-together-yourself kind of kit. I picked up a fairly large and sturdy tool box with a removable top tray from the hardware store. In it, I have a takedown rod, various brushes and jags, patches, cleaners/lubricants, etc. It also holds some basic gunsmithing supplies such as a screwdriver handle and interchangeable bits, drift punches, small hammer, tweezers, reading glasses, small vice-grips pliers, etc. In short, it contains most anything I would need to either bring to the range or use to cleanup after getting back.
Doyle is offline  
Old February 2, 2011, 08:45 PM   #5
wingspar
Senior Member
 
Join Date: September 24, 2009
Location: Oregon
Posts: 235
Otis cleaning kits. Then add to it what you really need. Kits are always full of stuff you will never use. Start with Otis, and build your own from there.
__________________
Gary
Will Fly for Food... and more Ammo
wingspar is offline  
Old February 2, 2011, 08:50 PM   #6
egor20
Senior Member
 
Join Date: November 14, 2010
Location: Northern Virginia
Posts: 1,762
I like this for two reasons;

1, the price, $19.97
2, its wood, I dislike aluminum cases.

http://www.sportsmansguide.com/net/c...p=WX2&i=170765
__________________
Chief stall mucker and grain chef

Country don't mean dumb.
Steven King. The Stand
egor20 is offline  
Old February 3, 2011, 10:07 PM   #7
Yung.gunr
Senior Member
 
Join Date: November 11, 2010
Location: Phoenix area
Posts: 1,385
+1 on the wooden boxed kit. It looks very nice and sturdy and has all you need minus the liquids. I bought a kit years ago that included even the cleaners from the range shop but it was like $50.00. Very nice but I didn't know there was less expensive stuff that works just as good.
Yung.gunr is offline  
Old February 3, 2011, 11:41 PM   #8
Shootin Chef
Senior Member
 
Join Date: January 30, 2011
Location: Columbia, SC
Posts: 121
back when my dad was letting me borrow his old duty .357 S&W revolver I bought a Hoppes #9 kit from a hunting store to clean it with and I still have it, but the rod isn't long enough to clean my rifles and my shotguns. The wooden box kit looks great for the price, I think I'll order that one and use it and my other kit to start building my own cleaning box.
I appreciate the suggestions!

Chef
Shootin Chef is offline  
Old February 6, 2011, 12:54 PM   #9
dtalley
Member
 
Join Date: May 25, 2007
Location: Texas
Posts: 36
I have a three bin (I guess that is what it is called) fishing tackle box. I buy individual pieces so I don't end up with brushes or such that I don't need. I have all my solvents in the bottom area and the places on the bins are labeled for the different calibers of brushes and swabs. I made a little rack for my one piece cleaning rods and I am currently puchasing a few of them.
It is also big enough to hold a couple of tools and bore light and such.
dtalley is offline  
Old February 13, 2011, 12:30 PM   #10
DrDragon
Member
 
Join Date: February 11, 2011
Location: TX
Posts: 31
I use both snakes and rods. I love how easy bore snakes are and perfect for a range bag to quickly run through before and after your shoot. Part of what I love about my firearms collection (a big part) is cleaning it, if you're the same, it's fun to just build yourself a kit out of pieces. I have yet to see a prepackaged kit that contains everything I'd want, and the individual pieces are relatively inexpensive. I use a Home Depot Homer box for my main home kit:



Inside




Range Kit


PS: First time posting pics, how do I make them smaller?
DrDragon is offline  
Old February 13, 2011, 12:33 PM   #11
DrDragon
Member
 
Join Date: February 11, 2011
Location: TX
Posts: 31
Also, Hoppe's No. 9 and Ballistol fulfill ALL my needs for cleaning/protecting. The other cleaning products you see in my kit rarely, if ever, get used.
DrDragon is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:09 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.08388 seconds with 9 queries