The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > The Harley Nolden Memorial Institute for Firearms Research

Reply
 
Thread Tools
Old July 11, 2011, 11:20 PM   #1
74camaroman
Member
 
Join Date: April 24, 2005
Location: northern California
Posts: 35
Iver Johnson Question???

I just bought an Iver Johnson 32 S&W and I need info. Yes, I have been to the IJ site but couldn't find this model. The facts:

1.) Top of barrel: Iver Johnson's Arms & Cycle Works
Fitchburg, Mass. U.S.A

2.) Serial Number A585xx located under left grip panel ( Black Rubber)
Serial Number also on bottom of trigger guard with just number 585XX no letters.

3.) Pat. Aug 25.06 (located on bottom of Butt strap)
Pat Pending

4.) 3 inch barrel- 5 shot cylinder

5.) Top of grip panel has an Owl's Face facing at you. ( not facing barrel)

6.) I got a partial box of shells 50 but 12 are empty spaces- The box is Dupont Remington Center Fire Cartridges, "KLEANBORE" priming. They are marked 32 S&W R-P. Lead round nose.

7.) Front site is High blade, rear site is about 1/2 long grove.

8.) The cylinder is not free spinning when closed. It can be fired either single action (pulling the hammer back) or double action (pulling the trigger back)

This IJ is nickel plated but alot of the nickel is pealing off.
I can't seem to find anything on this model. I would like to know the year of manufacture? Is this gun a black powder model? If not black powder what kind of bullets can it shoot? Where might I find bullets for this model?
What is the best way to clean the barrel, it has some minor pitting inside the barrel, also it has some minor pitting in the cylinders? ( the bullets were kept inside the cylinder for many years in an old ladies purse, so they were alittle green when removed)
I had a gunsmith look at it an said that it would shoot but wouldn't be very accuarate. It is tight and the lockup of the cylinder is tight also. everything works.
I am hoping someone out there has the information I need so thank you for any information you can add to this IJ piece, in advance
Bob.
74camaroman is offline  
Old July 12, 2011, 12:47 AM   #2
gyvel
Senior Member
 
Join Date: August 30, 2009
Location: Northern AZ
Posts: 5,229
According to Goforth's book, you have a "Third Model, 1st Variation Hammer" manufactured in 1911. (A30201-A66700.) One of the changes listed is an automatic cylinder stop that prevented the cylinder from free wheeling. Also, the grips are listed as having the owl logo horizontal.

They are listed as being safe with smokeless powder. (From 1909 on.)
gyvel is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:58 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05618 seconds with 9 queries