The Firing Line Forums

Go Back   The Firing Line Forums > The Hide > NFA Guns and Gear

Reply
 
Thread Tools
Old January 18, 2011, 10:18 PM   #1
Pukindog
Member
 
Join Date: December 10, 2009
Posts: 82
suppressors

I own a suppressor for my .22 rimfires. I had an idea. i have a Browning A-Bolt in 7mm08. It is threaded for the Boss. Question 1; can the Boss threads be used for a suppressor? question 2; if a can will fit the threads can I use a .30 caliber can?

Jeff
Pukindog is offline  
Old January 18, 2011, 10:19 PM   #2
zoomie
Senior Member
 
Join Date: January 23, 2006
Location: WY
Posts: 1,754
Quote:
if a can will fit the threads can I use a .30 caliber can?
You're asking if you can use a 30 cal on a smaller caliber? Yes. It won't work as well as a properly sized can, but lots of guys get a 30 cal and use them on everything (except rimfire, of course).
zoomie is offline  
Old January 19, 2011, 10:55 AM   #3
Poodleshooter
Senior Member
 
Join Date: August 7, 2000
Location: Floating down the James River in VA
Posts: 2,545
IIRC, the BOSS threads are 9/16-24 RH. I'm not sure about the length of the threading. I would suspect that it's fairly deep.
AAC and YHM make .308 suppressors for that pitch, but you'd have to get their specs to see what length threads they require .
Poodleshooter is offline  
Old January 20, 2011, 05:50 AM   #4
David Hineline
Senior Member
 
Join Date: December 23, 1999
Location: South Sioux City, Nebraska
Posts: 704
9/16X24 works fine in a mount, you would need about .600 of exposed threads and a square shoulder and check that the threads on the end of the barrel are aligned with the bore, the accuracy needed in threading to get the bullet out of a 2" compensator and out of an 8" silencer with a tight bore hole are two different types of threading.

Ask over on silencertalk.com and someone has probably done it.
David Hineline is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:07 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07682 seconds with 8 queries