The Firing Line Forums

Go Back   The Firing Line Forums > The Skunkworks > Handloading, Reloading, and Bullet Casting > Bullet Casting

Reply
 
Thread Tools
Old January 18, 2011, 09:40 PM   #1
Edward429451
Junior member
 
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
Swap 45 Colt Boolits

I have a .45/454 mould that I cast 325 gr SWCGC's with for my mdl 83. So far it is the only mould I have for 45 Colt / 454 and I would like to try some different boolits, maybe some 250/255's?

If anyone would like to try a 325 gr GC boolit trade me weight for weight for your cast boolits. I can provide the 325's as cast or sized, with or without gas check.

Mine is Lyman 325 gr SWCGC with two crimping grooves for 45C/454 sized to .452 with Red Rooster hard lube.

Thanks for looking :-)
Edward429451 is offline  
Old January 19, 2011, 07:56 AM   #2
hornady
Senior Member
 
Join Date: April 6, 2009
Location: SWPA
Posts: 428
I don’t know how much help this will be, last year I bought a Ruger Black hawk 45 colt. I bought a Lee 452-252 SWC mold, the bullets shot very well. About $20.00 for the Lee mold.
But I use a Lyman 450. The Lee Bullets would not hold much lube, so I also tumble lubed them. As I said the Ruger liked the bullets weight and design, but I am not a fan of the TL method.
I sold the mold and bought the Lyman 452424 – 255Gr SWC. These bullets shoot great too. But have wider / deeper lube grooves,
My point being, Lee molds are very cheap, and I have used several in the past to find a similar Lyman or RCBS mold design I liked.
You may loose a couple bucks on the resale of the Lee mold.
But still cheaper than mailing bullets back and forth.
hornady is offline  
Old January 19, 2011, 08:19 AM   #3
IllinoisCoyoteHunter
Senior Member
 
Join Date: December 23, 2008
Location: Southern Illinois
Posts: 1,505
I also have the above-mentioned 255 grn Lee swc mold. I also have a custom mold that drops 220 grn HP or 240 grn (iirc) FP's...it has reversible pins. I shoot this boolit out fo my TC encore 454 and it is a tackdriver.

http://thefiringline.com/forums/show...1&postcount=18
__________________
~~IllinoisCoyoteHunter~~

~NRA LIFE MEMBER~
~NRA CERTIFIED INSTRUCTOR~
IllinoisCoyoteHunter is offline  
Old January 25, 2011, 06:25 PM   #4
crowbeaner
Senior Member
 
Join Date: June 4, 2007
Location: Upstate SC
Posts: 1,938
Edward; I have a Saeco 300 grain 45 mould, but I won't be casting anything until the weather stabilizes. Cold metal and a hot pot equals splatter, and I'm too oldenphat to move very quickly. If I make any, I'll PM you and send you some to try. I size them .452" and can make them any kind of hard. Just be patient. CB. Oh, I forgot, they will have gaschecks. I wish I could afford an 83 in 41.
__________________
If you want your children to follow in your footsteps, be careful where you walk.
Beware the man that only owns one gun; he probably knows how to use it.
I just hope my ship comes in before my dock rots.
crowbeaner is offline  
Old January 27, 2011, 05:10 PM   #5
Edward429451
Junior member
 
Join Date: November 12, 2000
Location: Colorado Springs, Colorado
Posts: 9,494
Hey, thanks CB. PM me your addy and I'll shoot you off some funds for the shipping...
Edward429451 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.06810 seconds with 7 queries