The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old January 17, 2011, 08:51 AM   #1
Gator Weiss
Member
 
Join Date: August 13, 2007
Posts: 97
Loading all brass 12ga 2.5 inch shotgun shells

Scored a Baikal Coachgun the other day. Has 2.75" chambers. Has 20" barrells with screw-in choke tubes.

I am finding 12 gauge all brass shells designed to take pistol primers out there for roughly a buck a piece. I want to load some all brass shells to play with in the Baikal out on the range or in the woods. Want to load some birdshot and some buckshot - probably #4 buck.

Are any of you loading all brass low pressure (but load bang) all brass shotgun shells in black powder?

Has anyone tried these with Pyrodex CTG ?

Any comments on newspaper wads / tissue paper wads / cotton wad vs conventional card wads, etc?

Interested in thoughts on the subject and any techniques our fellow posters might be using.
Gator Weiss is offline  
Old January 17, 2011, 10:42 AM   #2
denster
Senior Member
 
Join Date: April 24, 2010
Location: Ohio
Posts: 464
Congrats on the coach gun. I've got two of them one in 20 and one in 12GA. You probably allready know that Tru-Chokes fit the Baikals. Might want to consider trying some slugs also. Both of mine will put R/L groups into 4" at 50yds with the inexpensive Rem and Win rifled slugs. Kind of a poor man's double rifle.
denster is offline  
Old January 17, 2011, 12:41 PM   #3
Fingers McGee
Senior Member
 
Join Date: March 19, 2008
Location: Missouri
Posts: 1,849
I frequently use Matech brass shells in my SxS shotguns. Best source for wads is Circle Fly. Over powder cards, and cushion wads shoult be 11 ga to fit properly. Over shot cards should be 10 ga for a good tight fit. Water glass (sodium Silicate), duco cement, hot glue, Elmers glue, or ??????? will seal them off and keep the shot in when handled and bouncing around in your pocket.

While I've never used Pyrodex, ffg APP and real ffg BP work very well. My normal load is 70 gr BP, over podwer card, cushion wad, 1 1/8 ox #7 1/2 shot, 10 ga over shot card and water glass sealer. I use the RCBS 12 ga dies set to put a slight roll on the case mouth so they're easier to drop in the SxS barrels.

There are probably as many methods in loading brass hulls as there are reloaders. Unlubed fiber wads, plastic wads, wasp nests, toilet paper, milk cartons, cardboard boxes, are being used as wads and cards. BP, APP, Pinacle, Pyrodex and T7 in granulations from Cannon to fffg are used as are most if not all shot sizes that vary depending on what they're being used for.

I'm sure others will chime in with their favorite load.

Load up and have some fun.

FM
__________________
Fingers (Show Me MO smoke) McGee - AKA Man of Many Colts - Alter ego of Diabolical Ken; SASS Regulator 28564-L-TG; Rangemaster and stage writer extraordinaire; Frontiersman, Pistoleer, NRA Endowment Life, NMLRA, SAF, CCRKBA, STORM 327, SV115; Charter member, Central Ozarks Western Shooters
Cynic: A blackguard whose faulty vision see things as they are, not as they should be. Ambrose Bierce
Fingers McGee is offline  
Old January 17, 2011, 09:35 PM   #4
Hawg
Senior Member
 
Join Date: September 8, 2007
Location: Mississippi
Posts: 11,694
Pyrodex works fine.
Hawg is offline  
Old January 17, 2011, 10:01 PM   #5
Hardcase
Senior Member
 
Join Date: April 14, 2009
Location: Sunny Southern Idaho
Posts: 1,906
I use Fingers' method (I probably learned it here from him) just as he posted above. I use Pyrodex R because black powder isn't available in my parts. Instead of water glass, I just use a bit of Elmer's glue around the edge of the card.

Works like a peach in my hundred year old Janssen & Sons farmer SxS.
__________________
Well we don't rent pigs and I figure it's better to say it right out front because a man that does like to rent pigs is... he's hard to stop - Gus McCrae
Hardcase is offline  
Old January 25, 2011, 07:58 AM   #6
Magnum Wheel Man
Senior Member
 
Join Date: July 26, 2006
Location: Southern Minnesota
Posts: 8,195
anyone ever try loading brass hulls with Trailboss ???

& how about annealing the mouth & roll crimping an over shot card ???

I've heard the cases are quite hard & split easily, so annealing might not be a bad idea anyways ???

also have heard of people having trouble using the balloon head cases with smokeless powders... not sure if Trailboss would be better than those "other powders" tried ???

thought the case head could possibly even be filled with lead or epoxy or ??? if the open head design didn't work well with smokeless ???
__________________
In life you either make dust or eat dust...

Last edited by Magnum Wheel Man; January 25, 2011 at 09:50 AM.
Magnum Wheel Man is offline  
Old January 25, 2011, 09:49 AM   #7
Noz
Senior Member
 
Join Date: February 25, 2009
Posts: 643
Crimping is not necessary and will in fact limit the life of the brass hulls.
Noz is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:29 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07120 seconds with 7 queries