The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old January 9, 2011, 03:21 PM   #1
rem1858
Member
 
Join Date: December 12, 2010
Location: Phoenix, AZ.
Posts: 73
If I knew then, what I know now...

I would have just picked up an ROA in the first place and would have three of them by now

Went out to the desert this morning, just got back from shooting the Pietta 1858, Colt Walker and the new to me ROA.

Started with the 1858, kind of, the cylinder latch is messed up.
Did shoot 2 cylinders out of it, but the latch at half cock is coming up and locking the cylinder and have to disassemble it and put it back together.
It is now locked up sitting on my bench here at the house.
Will tear it apart and see what is wrong with it.
Hopefully one of the parts from the spare parts kit I got from Cabelas will fix it

Next was the Walker.
Shot 2 cylinders wth 40gr of Pyro p
Shot 2 cylinders of 50gr
Shot 1 cylinder of 60gr
No problems.
Oh, the .457" balls now shave off a full ring instead of a half moon as with the .454"s

Now comes the ROA.
This thing is sweet
I kind of lost count of how many cylinders I shot this morning out of it.
Powder charges were 30-35-40-50gr
Very accurate, never bound up(guessing 8-10 cylinders full)
The Treso nipples came yesterday and the #11 CCI's worked perfectly.
No jambing from the blown nipples(they just rotate around and fall off).

So now I am thinking of returning those 2 extra Pietta 1858 cylinders that I got that do not fit in my gun, instead of getting another 1858 and put the money toward another ROA.
Have not decided yet.

Well, it was fun today.

Clarence
__________________
B.E. Master ranking
Distinguished Revolver Badge #99
EIC Service Pistol = 30 points (need a hard leg)
10z n Xs
rem1858 is offline  
Old January 9, 2011, 04:43 PM   #2
junkman_01
Junior member
 
Join Date: November 9, 2010
Location: Florida
Posts: 260
Those ROA's are sweet! See what can be done with a 175 year old ignition system and 20th century technology.
junkman_01 is offline  
Old January 9, 2011, 05:34 PM   #3
ironmace
Member
 
Join Date: September 19, 2010
Posts: 13
Now you're making me want one
ironmace is offline  
Old January 9, 2011, 05:42 PM   #4
mykeal
Senior Member
 
Join Date: October 8, 2006
Location: Northern Michigan
Posts: 2,760
How did you get 50 grains of Pyrodex in an ROA chamber?
mykeal is offline  
Old January 9, 2011, 06:08 PM   #5
rem1858
Member
 
Join Date: December 12, 2010
Location: Phoenix, AZ.
Posts: 73
mykeal

Dropped in 50gr by volume Pyrodex P
Installed .45 cal Precision Lube 2000 felt wad
Ram wad on top of powder
Install .457" Speer round ball
Ram ball on top of wad and powder.
Ball just sits below the mouth of the cylinder
Install CCI #11 caps
Fire all six shots

Rinse and repeat

As an aside(it would not have taken anymore than 50gr and I did not have to cram on the seating lever, it felt just right seating the ball).

Clarence
__________________
B.E. Master ranking
Distinguished Revolver Badge #99
EIC Service Pistol = 30 points (need a hard leg)
10z n Xs
rem1858 is offline  
Old January 9, 2011, 07:51 PM   #6
HisSoldier
Senior Member
 
Join Date: August 9, 2007
Location: Oregoncoast
Posts: 1,473
I had one given to me, stainless, beautiful gun. His brother, whom I knew and drank with a lot (Bad old days) had killed himself with it. I never could enjoy the gun, a pity. There were a few spots of blood on it, just thinking about makes me feel sad.

I sold it, and don't think I ever fired it. The buyer didn't have to know about the story it came with.
__________________
I have CNC produced 416 stainless triggers to replace the plastic triggers on Colt Mustangs, Mustang Plus II's, MK IV Government .380's and Sig P-238's. Video on installation in Sig;http://www.youtube.com/watch?v=Jh2v_-87DRM
HisSoldier is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:02 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.07053 seconds with 7 queries