The Firing Line Forums

Go Back   The Firing Line Forums > The North Corral > Black Powder and Cowboy Action Shooting

Reply
 
Thread Tools
Old December 16, 2010, 10:50 AM   #1
Tanker6
Senior Member
 
Join Date: October 21, 2010
Location: Texas
Posts: 193
A Little Help to a Newbie to CAS

Howdy all. I normally hang out over at the Reloading section, but thought I'd ask some advice from folks who shoot SASS/CAS.

I've been reloading .38 and .40 for about a year and half (about 3,000 rounds to date), but I've recently caught the CAS bug. I'm purchasing some pistols this weekend for me and my daughter to begin shooting CAS. I've decided to stay in the .38 variety because I already have experience with that round (and have brass, dies, etc.) plus my daughter has proven she can handle that round.

My question is this. I've been loading .38's, but I obviously need to "tone it down" some for CAS shooting. My previous loads were fired from my .357 and according to load data (no, I don't own a chrony), were around 900-950 fps. I've loaded with Unique, Silouette (the old WAP), and recently with SR7625 (which was the best option available at the time I last bought powder ). I've been using 125 gn lead purchased from Missouri Bullet Company and have been pleased with the results. They are 12 BHF.

Anybody have some advice as to a good load recipe for .38 for CAS which will get my velocities down in the 750 fps range?

Also, I'll say that I'll probably get into black powder in the not-so-distant future because one of the things about CAS that intrigues me is the history. For example, the pistols I'm purchasing this weekend are open tops . I love the look of 'em. It's only a matter of time until I bite off on an 1851 Navy or 1860 Army.

I appreciate the advice in advance.
Tanker6 is offline  
Old December 16, 2010, 11:39 AM   #2
zippy13
Senior Member
 
Join Date: August 23, 2008
Location: SoCal
Posts: 6,416
As you are aware, the majority of the load data for 125-gr .38 Spcl loads are for jacketed bullets. The typical soft-recoiling .38 Spcl load is the classic match round with a 148-gr LWC over 2.7-gr of Bullseye at around 730 FPS. With Missouri's 125-gr TCFP, 3.1-gr of Bullseye will give your young lady about 775 FPS.

With respect to your first BP C&B revolver: the Colts sure are pretty; but, the simpler Remington '58 may be a better choice for the beginner.
zippy13 is offline  
Old December 17, 2010, 01:23 PM   #3
Tanker6
Senior Member
 
Join Date: October 21, 2010
Location: Texas
Posts: 193
Thanks for the reply. Bullseye is normally easy to find around here, so that's a good idea.

I've never been a big fan of wadcutters....probably because I mostly shoot steel (I've got a small target range on my property), but that combo (Bullseye) with the 125 MBC's should be just fine. She's been handling the hotter loads of .38 I've loaded fine as well as my full power target loads in .40 S&W. She even fired another SASS member's 45LC without batting an eye last weeekend, so I'm thinking this will be fine.

As for the 1858 Remmies, I've also heard that comment before. Whatever decision I make on a 1st C&B, it will be a "side" project to the cartridge weapons, so I'll have lots of time to work out what I don't know.....(which reminds me of an old Army LTC I used to work for..."We're so dumb we don't know what we don't know.")
Tanker6 is offline  
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.
This site and contents, including all posts, Copyright © 1998-2014 S.W.A.T. Magazine
Copyright Complaints: Please direct DMCA Takedown Notices to the registered agent: thefiringline.com
Contact Us
Page generated in 0.05927 seconds with 7 queries